Axiom LC/LC OM3 fibre cable 80 m 10 Gbit/s
Aqua-coloured multi-mode fibre cable with LC male connectors on both ends, 80 m long, rated for 10 Gbit/s over 50/125 µm core/cladding
- Product typeConsumer Electronics
- Supports 10 Gbit/s data transfer for high-speed networking
- 80 m length provides extended reach in rack layouts
- OM3 multi-mode 50/125 µm core optimised for 10 GbE links
- Duplex LC male connectors on both ends ensure secure mating
- Aqua jacket colour identifies OM3 cable at a glance
Axiom LC/LC OM3 fibre cable 80 m
This Axiom cable provides an 80 metre multi-mode fibre link for network and storage connections. It uses a 50/125 µm core and cladding design with dual LC male connectors on each end. The aqua jacket identifies the OM3 classification and supports a 10 Gbit/s data transfer rate.
Suited to long runs in data centres
Installers who need a single 80 metre patch between patch panels or switches will find the length convenient. Builders requiring shorter cables, single-mode fibre, or different connector types such as SC or MPO should look at other options.
Fits into OM3 multi-mode infrastructure
The cable connects directly to LC transceivers or patch panels without adapters. Its dual LC ends free up port density by terminating two fibres in one connector body. The lifetime warranty covers the link for the duration of the installation.
How it compares
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
- Price $157.99
- Pricier than about 91% of the 1,224 comparable items (median $26.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Axiom |
| Product type | Consumer Electronics |
Questions about this item
What connectors must my patch panels or transceivers have to plug this cable in?
Both ends carry two LC male connectors, so each panel or transceiver needs a matching LC duplex port.
Will the 50/125 µm OM3 fibre work with the OM1 cables already in my rack?
OM1 uses a different core size, so mixing them on the same link introduces modal dispersion that degrades the 10 Gbit/s signal.
How can I confirm the link is running at the rated 10 Gbit/s after installation?
Check the switch or NIC port statistics for a negotiated speed of 10 Gbit/s and verify zero CRC or symbol errors on the interface counters.
More in SAS, SCSI, InfiniBand & MCIO Cables
Similar items
ATTO Technology SAS Cable SFF-8644 to SFF-8088 1m CABL8079EX1
Mellanox Technologies MFA1A00-E001 LinkX InfiniBand cable QSFP+ 3.28 ft
WISDUM 24-pin and 12+4-pin wide InfiniBand cable combo, 132 and 174 LEDs
Qnap CAB-NIC40G30M-QSFP 40 Gbit/s InfiniBand cable 30 m
- Consumer Electronics





