Axiom MPO Female to 4 LC Multimode OM3 50/125 Fiber Breakout Cable 25m
Splits a single MPO female connector into four LC male ends for 50/125 µm multimode OM3 fibre runs up to 25 metres
- Product typeConsumer Electronics
- OM3 multimode supports high-bandwidth 50/125 µm links
- MPO female to 8 LC male fans out one trunk to four duplex ports
- 25 metre aqua jacket reaches cross-connect cabinets
- Crush-resistant sheath protects fibers in dense trays
- Lifetime warranty backs long-term installation confidence
Breakout cable for parallel fibre links
The Axiom breakout cable splits a single MPO female connector into eight LC male connectors, carrying four duplex channels over OM3 multimode fibre. It is built for installers who need to distribute a high-density trunk into patch-panel ports or transceiver interfaces. The aqua jacket identifies the OM3 rating at a glance. Crush-resistant construction protects the fibres during routing and termination.
Suited to OM3 backbone patching.
This cable serves data-centre technicians extending 50/125 µm multimode links between cassettes, switches or servers. It will not suit engineers who require single-mode performance, OS2 specifications or APC polishes for long-haul wavelengths. Buyers needing MPO-to-MPO continuity or a different fibre count should select an alternative assembly.
25-metre OM3 50/125 µm length defines reach
The 25-metre length sets the maximum link distance for the supported Ethernet and Fibre Channel speeds on OM3 50/125 µm fibre. Attenuation and modal bandwidth are calibrated for this exact distance and core size. Verify that the planned run and transceiver specifications match these parameters before ordering.
How it compares
Measured against everything we stock in IDE/PATA Ribbon Cables, at today’s prices. Recalculated every night.
- Price $268.99
- Pricier than about 90% of the 63 comparable items (median $24.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | AXIOM |
| Product type | Consumer Electronics |
Questions about this item
What panel cut-out or adapter do I need for the MPO female connector?
The MPO female end requires a standard MPO panel cut-out or a compatible MPO adapter plate; the cable itself is 25 metres long with an aqua jacket.
How do I seat the eight LC male connectors without damaging the ferrules?
Push each LC male straight into its duplex adapter until the latch clicks; avoid twisting the 50/125 µm fibres during insertion.
When should I re-inspect or replace the breakout cable?
Inspect the aqua jacket and all eight LC ferrules after any crush event or if insertion loss rises; the cable carries a lifetime warranty.
More in IDE/PATA Ribbon Cables





