PYLE AUDIO PP444 Phono Turntable Pre Amplifier 12 V DC car electronics accessory
- Installation Tools
- Converts Phono Sign…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
AZDOME
Converts 12V-24V vehicle power to 5V/2.5A USB Type C for continuous dash cam operation with low voltage cut-off at 11.8V or 23.6V
This AZDOME JYX05 hardwire kit converts a vehicle 12 V to 24 V supply into a stable 5 V 2.5 A USB Type C output for compatible dash cameras. The 11.5 ft cable reaches from the fuse box to the camera mounting point with an input lead of 0.8 m and an output lead of 2.7 m. Built‑in protection circuits guard against reverse connection, short circuit, overload and overtemperature, cutting power if the circuit exceeds 130 and restoring it at 90. Low‑voltage protection disconnects the kit at 11.8 V or 23.6 V after 60 s to preserve starting power.
Drivers who want 24‑hour parking surveillance on an AZDOME M27, M330, PG16S‑3CH, M580, M560‑3CH or PG19X dash cam will benefit from the constant BAT+ and ACC‑switched wiring. The kit is designed only for cameras that accept 5 V 2.5 A through a USB Type C port, so vehicles without a suitable fuse tap location or owners of dash cams using barrel or Micro‑USB connectors cannot use it. Installers who prefer a simpler cigarette‑lighter adapter should look elsewhere.
The single specification that determines compatibility is the 5 V 2.5 A USB Type C output; the dash camera must match this exact voltage, current and connector type. Input tolerance of 12 V to 24 V covers cars, trucks, SUVs and big rigs, while the 11.5 ft length suits most cabin routings. If the camera requires a different voltage, a higher amperage or another connector, this hardwire kit will not power it correctly.
Measured against everything we stock in Car Audio Accessories & Wiring, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Product type | Rearview Monitor |
The dash cam should power on and enter parking mode when the ignition is off. The kit converts 12-24V input to 5V/2.5A output via the USB Type C plug. If battery voltage drops to 11.8V or 23.6V, the kit cuts power after 60 seconds to protect starting ability.
The kit includes the hardwire cable (11.5 ft total: 0.8 m input, 2.7 m output) with a USB Type C connector, RED wire (BAT+) for constant fuse, and YELLOW wire (ACC) for ACC fuse. Fuse taps and add-a-circuit adapters are not included and must be purchased separately for your fuse box.
This kit is compatible with AZDOME M27, M330, PG16S-3CH, M580, M560-3CH, and PG19X dash cams that use a USB Type C port and require 5V/2.5A input. It accepts 12-24V vehicle systems for cars, trucks, SUVs, and big rigs.
More in Car Audio Accessories & Wiring
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?