We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Baldor-Reliance three-phase motor, cast-iron frame, 182TC C-face, teal enamel finish

Baldor-Reliance

Baldor-Reliance VEM3661T 3 HP 182TC Three-Phase Motor

SKU CH-QTZZ-73RZ3

Three-phase general-purpose motor delivering 3 HP at 1755 rpm with 89.5% nominal efficiency in a cast-iron 182TC frame

  • Product typeMotors
  • Three-phase design delivers 3 HP at 1755 rpm
  • TEFC cast-iron frame suits harsh 40 °C environments
  • Dual-voltage 208-230/460 V fits common industrial supplies
  • 5 % nominal efficiency lowers energy cost
  • 15 service factor handles peak loads reliably

Three-phase motor for continuous industrial duty

The Baldor-Reliance VEM3661T is a 3 HP three-phase motor built for general-purpose use in industrial environments. Its 182TC frame with C-face mounting suits direct-coupled equipment such as pumps, fans and gearboxes. The cast iron frame and Class F insulation support continuous operation in ambient temperatures up to 40 °C.

Steady output at full load across the speed range

At 1755 rpm nameplate speed the motor delivers its rated 3 HP with a 1.15 service factor for occasional overload margin. Full-load current is 8.2 A at 208-230 V or 4.1 A at 460 V, allowing stable performance on either low or high voltage supplies. Continuous duty rating means the motor sustains this output without time limits.

TEFC enclosure manages heat with low noise

The totally enclosed fan cooled design dissipates heat through the cast iron frame while keeping contaminants out. Ball bearings reduce friction losses, contributing to the 89.5 % nominal efficiency. With no internal thermal protection fitted, external overload devices must be provided by the installer to match the application.

How it compares

Measured against everything we stock in General Hardware & Accessories, at today’s prices. Recalculated every night.

Price $1,243.99
Pricier than about 96% of the 2,607 comparable items (median $18.99).

Specifications

Product
Brand nameBALDOR-RELIANCE
Product typeMotors

Questions about this item

How much heat will the 3 HP motor generate when running continuously at 1755 rpm in a 40 °C ambient environment?

The motor carries a 1.15 service factor and Class F insulation, allowing continuous duty at full load in ambient temperatures up to 40 °C without exceeding thermal limits.

What three-phase supply voltage and starter gear must already be on site for the 208-230/460 V windings?

A 208-230 V or 460 V three-phase 60 Hz feed is required, plus a starter and overloads rated for 8.2 A at low voltage or 4.1 A at high voltage.

Will the 182TC C-face mount and 1.15 service factor let this motor replace an older 182T frame unit on the same pump?

Yes, the 182TC C-face bolts directly to NEMA 182T pump flanges, and the 1.15 service factor provides the same overload margin as standard 182T designs.

More in General Hardware & Accessories

Similar items