Banjo RN300-200 Reducing Nipple 3" x 2" MNPT Sch 80
Schedule 80 polypropylene reducing nipple connects 3" and 2" male NPT threads at 300 psi
- Product typeDrain Components
- Main materialHAWA
- Product colorBlack
- Schedule 80 polypropylene handles 300 psi operating pressure
- Male NPT threads connect 3 in to 2 in pipe sizes
- Black HAWA material resists corrosion in harsh environments
- Rated from -20 to 150 degrees F for wide temperature range
- 3-7/16 in overall length fits tight installation spaces
Application fit
The Banjo RN300-200 reducing nipple connects a three-inch male NPT thread to a two-inch male NPT thread in Schedule 80 polypropylene piping systems. It suits installers who need a straight, rigid transition between those two nominal sizes in chemical-transfer or industrial-drain layouts.
Sustained-load behaviour
Moulded from HAWA polypropylene, the fitting holds a 300 psi maximum operating pressure across a continuous temperature span of minus 20 to 150 degrees Fahrenheit. The Schedule 80 wall thickness resists creep and stress cracking during long-term pressurised service without deformation.
Upgrade path
This nipple replaces a field-fabricated reducer assembly or a lower-schedule fitting when the system demands full Schedule 80 pressure rating and the chemical resistance of HAWA polypropylene. The jump is justified whenever code or spec requires the higher pressure class and the broader temperature envelope.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $10.99
- Cheaper than about 82% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Banjo |
| Model name | RN300-200 |
| Product type | Drain Components |
| Product color | Black |
| Size & build | |
| Main material | HAWA |
Questions about this item
Does the 300 psi rating hold when the system runs continuously at the 150 °F limit?
The polypropylene body is rated for 300 psi maximum operating pressure across the full -20 °F to 150 °F range.
Which thread sealant works with the 3 in and 2 in MNPT ends?
Use a PTFE tape or paste approved for polypropylene and NPT threads on both the 3 in and 2 in male ends.
Will the 3 7/16 in overall length fit between my existing Schedule 80 fittings?
The nipple measures 3 7/16 in end-to-end, so measure the gap between your current Schedule 80 components to confirm clearance.
More in Drain Stoppers, Strainers & Traps
Similar items
Nibco, Inc.
Nibco, Inc. 7073LF-34 90° Elbow Trap 3/4 in C x FNPT Bronze
- Drain Components
- HAWA
$10.99
0.00013332BTC
In stock
Banjo
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
$13.99
0.00016972BTC
In stock