Banner OTBVP6QDH Optical Touch Button 10-30 V dc M12 IP66 electrician tool

Industrial Touch Button for 10-30 V dc Systems

The Banner OTBVP6QDH is an optical touch button designed for momentary actuation in industrial control circuits. It operates on a 10-30 V dc supply and provides a complementary PNP output suitable for programmable logic controllers and safety interfaces. The IP66 and NEMA 4X ratings allow installation in wash-down and outdoor environments. Electricians and panel builders use it where a sealed, non-mechanical actuator is required.

M12 Quick-Disconnect Simplifies Wiring

A Euro-style M12 quick-disconnect with four conductors terminates the 9 m cable, enabling tool-free connection to standard sensor cordsets. The base-mount saddle housing uses an M30 x 1.5 mounting thread for secure panel attachment. Polysulfone construction resists chemicals and impact, but the optical sensing face must remain clean; oil, paint or heavy dust can block the single beam and prevent actuation. Verify pin-out matches the controller before applying power.

Stable Response Across Temperature Range

The button maintains a maximum response time of 100 ms from -20 °C to 50 °C at up to 90 % relative humidity non-condensing. Optical actuation eliminates mechanical bounce, so repeated cycles under sustained load do not degrade switching consistency. The thermoplastic housing and black field cover meet NEMA 1, 3, 4, 4X, 12 and 13 requirements for long-term exposure to water, oil and coolant.