We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Batianda Raspberry Pi 5 case kit with 4.3 inch touchscreen, 5 MP camera, 0.96 inch OLED, M.2 NVMe slot

Batianda

Batianda Raspberry Pi 5 Case Kit 4.3" Touchscreen 5 MP Camera 0.96" OLED M.2 NVMe Slot 1231 MB/s

SKU CH-CVCM-8WRA2

Case kit adds 4.3" touchscreen, 5 MP camera, 0.96" OLED, stereo speakers and M.2 NVMe slot up to 1231 MB/s

  • M.2 NVMe slot enables 1231 MB/s PCIe 3.0 speeds
  • 3 inch touchscreen with 800 x 480 IPS and 5-point capacitive touch
  • 5 MP camera captures 2592 x 1944 pixel images
  • 96 inch OLED shows 128 x 64 pixel status data
  • Built-in stereo speakers plus 3.5 mm and optical audio outputs

All-in-One Raspberry Pi 5 Enclosure

This kit transforms a Raspberry Pi 5 into a compact desktop unit. It bundles a 4.3 inch IPS touchscreen, a 5 MP camera, a 0.96 inch OLED status display, stereo speakers, active cooling and programmable RGB lighting. An M.2 NVMe slot accepts 2230 to 2280 drives for high-speed storage. The board itself is not included.

Makers Who Want Integrated Peripherals

Builders who need a ready-to-use touchscreen, camera and NVMe storage in one chassis will benefit. Users who already own separate displays or cameras, or who prefer a bare-board setup, should look at simpler cases. The kit is exclusive to Raspberry Pi 5 and cannot be used with earlier models.

NVMe Storage Up to 1231 MB/s

The PCIe 3.0 interface supports sequential reads up to 1231 MB/s, far above the SD card ceiling of 104 MB/s. PCIe 2.0 drives are limited to 500 MB/s. SATA M.2 drives are not compatible. The SSD serves as a bootable system drive, removing the microSD bottleneck for OS and application loads.

How it compares

Measured against everything we stock in 2-in-1 Device Accessories, at today’s prices. Recalculated every night.

Price $94.99
Pricier than about 72% of the 7,473 comparable items (median $56.99).

New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

Which Raspberry Pi board must I already own for this kit to work?

The kit is compatible only with Raspberry Pi 5; earlier models will not fit or function.

Can I keep using my M.2 SATA drive with the PCIe 2.0 or 3.0 NVMe slot?

No, the slot accepts only M.2 NVMe SSDs in 2230, 2242, 2260 or 2280 sizes; SATA drives are not supported.

How can I verify the SSD is running at the declared 1231 MB/s after setup?

Run a disk benchmark such as hdparm or fio on the NVMe drive; the result should approach the PCIe 3.0 ceiling of 1231 MB/s.

More in 2-in-1 Device Accessories

Similar items