Beckett CB504UL 460V Condensate Pump
A 460 V condensate pump with a one gallon tank, built-in safety switch and replaceable check valve for high lift installations up to 50 ft
- Handles high-lift installations up to 50 ft
- Built-in safety switch protects against overflow
- One-gallon tank capacity reduces cycle frequency
- Replaceable check valve simplifies maintenance
- UL/CUL listed for 460V industrial use
Industrial Condensate Pump 460V
The Beckett CB504UL is a heavy-duty condensate pump built for industrial HVAC applications. It operates on a 460-volt supply and includes a one-gallon tank, replaceable check valve and pre-wired terminal block. A built-in safety switch adds operational protection. The unit is UL/CUL listed for compliance.
High-Lift Installations Up To 50 Feet
This pump suits installers who need reliable condensate removal at lifts up to 50 feet in commercial or industrial systems. It is not intended for low-voltage residential circuits or for applications that require a smaller tank capacity. Buyers needing 115-volt or 230-volt operation should select the alternative voltage models.
Pre-Wired Terminal Block For Direct Connection
The pre-wired terminal block simplifies electrical hookup inside a control panel, freeing installers from separate conduit runs for the pump motor. The replaceable check valve allows service without replacing the entire assembly. The one-gallon reservoir handles intermittent high-volume discharge from multiple air-handling units.
How it compares
Measured against everything we stock in Fans, Vents & Climate Control, at today’s prices. Recalculated every night.
- Price $370.99
- Pricier than about 89% of the 328 comparable items (median $68.99).
Specifications
| Product | |
|---|---|
| Brand name | BECKETT |
Questions about this item
What voltage supply must already be on site for the 460 V model to operate?
A 460 V three-phase electrical supply is required; the pump is pre-wired for that voltage and will not run on 115 V or 230 V circuits.
Can the existing 115 V or 230 V wiring in my facility be reused for this pump?
No — the CB504UL 460 V unit needs a dedicated 460 V feed; the lower-voltage models are separate SKUs and cannot share the same circuit.
How do I confirm the pump is running correctly after installation?
Verify the safety switch has not tripped, listen for the quieter heavy-duty motor, and check that condensate is discharged at the rated 50 ft lift without leaks at the replaceable check valve.
More in Fans, Vents & Climate Control





