We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Belkin 32.8 ft duplex multi-mode fibre patch cable with LC and ST connectors

Belkin

Belkin F2F402L0-10M fibre optic cable 32.8 ft LC/ST multi-mode 50/125 µm

SKU CH-YQED-E60BA MPN F2F402L0-10M

A 32.8 ft duplex multi-mode patch cable with 50/125 µm core, LC male to ST male connectors for network links

  • Connector count1
  • Connector detailsConnector on First End:2 x LC Male Connector on Second End:2
  • Product typeOthers
  • Overall length32.8 ft (10 m)
  • Key featuresCable Characteristic:Patch Cable Packaged Quantity:1
  • 8 ft reach links equipment across racks
  • Duplex LC to ST connects mismatched transceivers
  • Multi-mode 50/125 µm supports short-range networks
  • Patch-cable construction simplifies rack-to-panel routing
  • Light 4.80 oz weight eases cable management

Patch cable for network devices

The Belkin F2F402L0-10M is a duplex fibre optic patch cable built for network device connections. It uses multi-mode fibre with a 50/125 µm core and cladding diameter. The 32.8 ft length links equipment across racks or rooms. Both ends are terminated for immediate use.

Suits installers needing LC-to-ST links

Technicians who need to connect LC male ports to ST male ports on multi-mode infrastructure will find the correct ends on one cable. Builders who require single-mode fibre, a different core diameter, or other connector types such as SC or MTP must source a different cable. The single packaged unit covers one duplex run.

Multi-mode 50/125 µm fibre type

The core and cladding diameter of 50/125 µm determines which transceivers and patch panels the cable supports. Multi-mode optics designed for this specification will operate correctly. Equipment that demands single-mode or a different core size will not work with this cable.

How it compares

Measured against everything we stock in Fiber Optic Patch Cables, at today’s prices. Recalculated every night.

Price $16.99
Cheaper than about 73% of the 812 comparable items (median $29.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameBelkin
Product typeOthers
Ports & slots
Connector count1
Connector detailsConnector on First End:2 x LC Male
Connector on Second End:2 x ST Male
Size & build
Overall length32.8 ft (10 m)
Shipping weight0.16 kg
Package size216 × 203 × 183 mm

Questions about this item

Does the 32.8 ft length add noticeable signal loss for a multi-mode 50/125 µm run?

At 32.8 ft the insertion loss on 50/125 µm multi-mode fibre is negligible for typical LAN speeds; the duplex LC/ST patch cord is designed for short-range links.

What ports must my switch and patch panel provide for the LC and ST connectors?

You need two LC receptacles on one side and two ST receptacles on the other; each connector is male so the equipment side must be female.

Will the duplex LC/ST ends fit the older ST-only transceivers I still use?

The cable terminates in two ST males on the second end, so it plugs directly into legacy ST ports; the first end uses two LC males for newer gear.

More in Fiber Optic Patch Cables

Similar items