We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aqua duplex multimode fibre cable with four LC connectors, ten feet long

Belkin

Belkin F2F402LL-03M-G 10 ft LC/LC Duplex Multimode Fibre Optic Cable 50/125 Aqua

SKU CH-MHD0-1BVD1 MPN F2F402LL-03M-G

10 ft aqua duplex cable connects LC multimode links with 50/125 µm cores and 2.5 dB/km loss at 850 nm

  • Connector count4
  • Connector detailsConnector A: LC Connector B: LC
  • Product typeOthers
  • Product colorAqua
  • Overall length10 ft (3.05 m)
  • DetailsCore/Cladding Diameters: 50 mm/125 mm Max Attenuation (dB/km
  • 10 ft reach connects rack equipment across rows
  • LC duplex ends link transceivers without adapters
  • 50/125 µm core supports 10 GbE bandwidth
  • Aqua jacket identifies OM3 multimode at a glance
  • 3 mm outer diameter routes through tight cable trays

10 ft LC/LC Duplex Multimode Cable

This 10 ft aqua patch cable uses 50/125 µm multimode fibre with LC connectors on both ends. It suits installers linking switches, patch panels or transceivers in enterprise or campus LANs. The duplex construction carries two fibres for full-duplex links. Buyers needing single-mode fibre or longer runs should choose a different cable type.

Attenuation and Return Loss

Maximum attenuation is rated at 2.5 dB/km at 850 nm and 0.7 dB/km at 1310 nm. Minimum return loss reaches 20 dB at both wavelengths, keeping reflections low for stable 10 Gbit/s transmission. The 3 mm outer jacket protects the fibres during routing and termination. No active components mean zero power draw and silent operation.

Build and Connectors

Four LC connectors — two per end — are factory polished for reliable mating. The aqua jacket identifies 50/125 µm multimode grade at a glance and is backward compatible with 62.5/125 µm equipment. The 3 mm diameter allows dense patch-panel routing without snagging. Installers requiring SC, ST or MPO interfaces will need alternative cables.

How it compares

Measured against everything we stock in Fiber Optic Patch Cables, at today’s prices. Recalculated every night.

Price $30.99
Typical for this category: the median of 812 items is $29.99.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameBelkin
Model nameF2F402LL-03M-G
Product typeOthers
Product colorAqua
Ports & slots
Connector count4
Connector detailsConnector A: LC
Connector B: LC
Size & build
Overall length10 ft (3.05 m)
Shipping weight0.23 kg
Package size201 × 114 × 23 mm

Questions about this item

How do I install the LC connectors and what step do people miss?

Insert each LC connector until the latch clicks; the step people miss is removing the dust caps and cleaning the ferrule end-faces with a lint-free wipe and isopropyl alcohol before mating.

What maintenance or replacement will the cable need later?

Periodically inspect and clean both LC ferrule end-faces with a fibre scope and approved cleaning tools; replace the patch cord if return loss drops below 20 dB at 850 nm or 1310 nm or if the aqua jacket shows cuts or kinks.

What limit appears first under sustained 10 Gbps use?

Attenuation of 2.5 dB/km at 850 nm limits the practical 10 Gbps reach; the 10 ft length stays well within that budget, so the first limit is usually connector contamination rather than fibre loss.

More in Fiber Optic Patch Cables

Similar items