We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact rectangular wireless access point with matte finish and Ethernet port

BFKK

BFKK 1200Mbps Dual-Band Wireless Access Point

SKU CH-JRDH-TQ2D7

Dual-band wireless access point delivering 1200 Mbps across 2.4 GHz and 5 GHz with a 100 Mbps Ethernet port for wired-to-WiFi bridging

  • Dual-band 2.4 GHz and 5 GHz operation gives 1200 Mbps total throughput
  • 300 Mbps on 2.4 GHz band provides strong anti-interference coverage
  • 900 Mbps on 5 GHz band delivers higher speed over longer distance
  • Flexible DC 5 V to 15 V input via USB or barrel connector
  • Compact card-size design fits surveillance cameras, DVRs, scales and IoT devices

Compact Dual-Band Wireless Bridge

The BFKK 1200Mbps access point adds dual-band Wi-Fi to wired devices such as IP cameras, DVRs and IoT sensors where running Ethernet is impractical. It operates as a bridge, repeater or wired-to-wireless adapter with a small form factor suited to tight enclosures.

Thermals Noise And Power Draw

The unit accepts a wide DC 5V to 15V input via USB or a dedicated barrel connector and ships with a 2-in-1 cable that combines power and a 100Mbps RJ45 link. Typical draw is 5V at 2A with ripple below 100mV, so it runs cool and silent without a fan.

Upgrade Path And Fit

It replaces a direct Ethernet run when cabling is impossible, adding 2.4GHz at 300Mbps and 5GHz at 900Mbps under 802.11A/B/G/N/AC. The jump is worth it for installers who need reliable wireless backhaul for security or industrial gear without adding a full router.

How it compares

Measured against everything we stock in Wi-Fi Access Points, at today’s prices. Recalculated every night.

Price $67.99
Cheaper than about 88% of the 782 comparable items (median $253.99).

Specifications

No published specifications for this item yet.

Questions about this item

How do I install this access point and which power option is correct for my setup?

Connect the included RJ45 100Mbps 2-in-1 cable to your device and choose either the DC 5V-15V input or the USB power option; the typical requirement is 5V/2A with ripple under 100mV.

What maintenance or replacement will this unit need over time?

The RJ45 100Mbps cable and the dual power cable are the only consumable parts; replace them if connectors wear or voltage ripple exceeds 100mV.

What limit appears first when the access point runs continuously at high load?

The 100Mbps Ethernet port caps wired throughput well below the 300Mbps 2.4GHz plus 900Mbps 5GHz wireless rates, so sustained traffic hits the wired bottleneck first.

More in Wi-Fi Access Points

Similar items