TRENDnet TK-207K 2-Port USB KVM Switch
- 1 x USB (Type A), 1…
- 2 x USB Keyboard/Mo…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Extends 4K 60 Hz HDMI and four USB 2.0 ports up to 100 m over Cat5e/6/6a/7 with PoE, RS-232 and bi-directional 3.5 mm audio
This HDBaseT 2.0 KVM extender transmits uncompressed 4K 60 Hz video up to 100 m over a single Cat5e/6/6a/7 cable. It includes bi-directional 3.5 mm stereo audio pass-through on both transmitter and receiver units. USB 2.0 data travels at 480 Mbps with zero added latency. The system is designed for remote PC control and interactive display operation across long distances.
The extender supports 4K 60 Hz YUV4:2:0 8-bit video and 1080p 120 Hz signals without compression or loss. Four USB 2.0 device ports on the receiver share a 5 V 0.5 A per-port power budget, limiting high-draw peripherals. One USB host connector on the transmitter links to the source computer. RS232 pass-through and one-way PoE from transmitter to receiver are also carried over the same cable.
Uncompressed 4K 60 Hz reaches the full 100 m or 330 ft on Cat5e/6/6a/7 without signal degradation. USB 2.0 throughput remains at 480 Mbps across that distance. The single-cable design carries video, audio, USB, RS232 and power simultaneously. EDID management is handled via a DIP switch on the unit rather than software negotiation.
Measured against everything we stock in KVM Switches & Rack Consoles, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Product type | KVM Switch |
Yes, the extender transmits 4K 60Hz signals over a single Cat5e cable up to 100 metres or 330 feet without signal loss or latency.
The receiver provides four USB 2.0 ports operating at up to 480 Mbps; verify video at 4K 60Hz on the display and test keyboard, mouse or other USB devices for zero-delay response.
The kit includes transmitter and receiver units with RS232 and 3.5 mm audio ports; you must supply Cat5e/6/6a/7 cable and ensure each USB device on the receiver draws less than 5V 0.5A.
More in KVM Switches & Rack Consoles
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?