We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver G1/4" 90-degree rotary fitting for 12 mm rigid tubing

Bitspower

Bitspower BP-E90RML G1/4" 12 mm 90° rotary fitting

SKU CH-P22V-A7A01 MPN BP-E90RML

Connects 12 mm rigid tubing at a 90° rotary angle using a G1/4" thread

  • Product typeFittings
  • True Hi-Flow design maximises coolant throughput
  • G1/4" thread fits standard water-cooling components
  • Hi-Quality brass construction resists corrosion
  • Hidden O-ring seal prevents leaks
  • 90° rotary joint eases 12 mm rigid tube routing

Precision 90° rotary fitting

The Bitspower BP-E90RML is a G1/4" 90° rotary adapter built for 12 mm OD rigid tubing. It connects Crystal Link hard tubing with a true hi-flow path and hidden O-ring seals. The silver-shining brass body suits custom liquid-cooling loops that demand clean right-angle routing.

Thermal and acoustic profile

As a passive brass component it adds no heat, noise or power draw to the system. Flow restriction is minimised by the hi-flow internal geometry. The rotary joint lets installers align the 90° bend without stressing the rigid tubing or the G1/4" port threads.

Compatibility constraint

This adapter works exclusively with Bitspower rigid tubing and G1/4" threaded ports. Builders using soft tubing, other tubing diameters or non-Bitspower hard tube must choose a different fitting.

How it compares

Measured against everything we stock in Hose Fittings, Adapters & Clamps, at today’s prices. Recalculated every night.

Price $10.99
Cheaper than about 68% of the 2,955 comparable items (median $17.99).

Specifications

Product
Product typeFittings

Questions about this item

How do I install the Bitspower BP-E90RML fitting onto 12 mm rigid tubing, and what step is commonly missed?

Thread the G1/4" end into the component first, then push the tubing fully into the hidden O-ring seat; the step often missed is verifying the tubing bottoms out past both O-rings before tightening the rotary collar.

What maintenance will the Bitspower BP-E90RML fitting need over time?

Inspect the hidden O-rings annually for hardening or flattening; replace them if they lose elasticity, and re-lubricate with silicone grease when reassembling to maintain the seal.

What limit appears first when the Bitspower BP-E90RML fitting runs under sustained flow?

The 90° bend creates the primary restriction; its tight radius becomes the flow bottleneck before the G1/4" thread or the Hi-Flow bore reaches any limit.

More in Hose Fittings, Adapters & Clamps

Similar items