Brady 121128 B-7569 Floor Marking Tape vinyl 1/2 in 50 ft
Transparent vinyl floor marking tape in a continuous 50 ft roll, 1/2 in wide and 4 mil thick with a gloss finish
- Product colorTransparent
- Transparent vinyl tape marks floors without obscuring surfaces
- 50 ft continuous roll covers long aisles in one piece
- 4 mil thickness resists tears from heavy foot traffic
- Gloss finish stays legible under warehouse lighting
- B-7569 series rated for indoor facility safety use
Brady B-7569 Floor Marking Tape
Brady 121128 B-7569 is a vinyl floor marking tape supplied in a continuous roll. It measures 1/2 in wide and 50 ft long with a 4 mil thickness. The solid blue tape features a gloss finish and carries no printed legend. It is designed for facility and traffic safety marking applications.
Non-reflective vinyl with gloss finish
The tape uses a non-retroreflective vinyl construction with a gloss surface. It does not glow in the dark and provides no retroreflective grade. The material is intended for standard indoor marking where reflective or photoluminescent properties are not required. Its thin profile suits low-traffic floor areas.
Continuous roll for straight-line marking
Supplied as a single 50 ft roll, the tape allows uninterrupted runs for aisle or boundary lines. The solid blue colour and gloss finish remain consistent across the length. It is not suited for applications needing printed legends, retroreflectivity or glow-in-the-dark visibility. Buyers needing wider coverage or reflective grades should select a different product.
How it compares
Measured against everything we stock in Traffic Cones, Signs & Safety Gear, at today’s prices. Recalculated every night.
- Price $17.99
- Cheaper than about 81% of the 1,503 comparable items (median $61.99).
Specifications
| Product | |
|---|---|
| Brand name | Brady |
| Product color | Transparent |
Questions about this item
How do I apply the 1/2 in wide Brady 121128 tape so it stays down on a concrete floor?
Clean the surface until it is dry and free of oil, then press the vinyl tape firmly along its full 50 ft length; the step most often missed is using a hand roller to remove trapped air bubbles.
When will the 4 mil vinyl layer need replacing in a forklift aisle?
Expect to replace the roll once the gloss finish wears through to the blue base or edges start lifting, typically after heavy wheel traffic has abraded the 4 mil thickness.
At what temperature does the adhesive on this B-7569 series tape start to lose grip?
The vinyl tape is rated for standard indoor facility temperatures; sustained heat above typical warehouse conditions will soften the adhesive before the vinyl itself degrades.
More in Traffic Cones, Signs & Safety Gear
Similar items
Vaxcel C0174 Turin 14.5in Semi-Flush Mount Bronze traffic safety equipment
Condor 1YAL6 Class 2 High Visibility Vest Orange 2XL 54 in chest
- Orange
Litetronics RFM3T435B LED Magnetic Retrofit Kit 44-1/2" 35W traffic safety equipment
Condor High Visibility Vest Class 2 3XL Orange 56in chest 26in length
- Orange





