Brileine CAT6-S1 50 shielded pass-through RJ45 connectors + 50 strain relief boots

50 shielded pass-through connectors + 50 boots

This 100-piece kit supplies 50 Cat 6 shielded pass-through RJ45 plugs and 50 matching strain-relief boots. The pass-through design lets installers verify wire order before crimping, reducing failed terminations. Gold-plated, three-point staggered contacts support up to 1000 megabits per second on solid or stranded 24 to 26 AWG cable with insulation diameters of 1.05 to 1.15 mm.

Installers terminating shielded Cat 6 or Cat 5e runs

Suited for technicians who need shielded ends and want visual confirmation of conductor sequence during assembly. The 1.1 mm conductor holes accept standard FTP/STP cables and work with most pass-through crimping tools. Not for installers who only have non-pass-through crimpers, who need unshielded plugs, or who require connectors rated for cable gauges outside the 24 to 26 AWG range.

1.1 mm maximum conductor-hole diameter

This single dimension decides whether your cable fits. The connectors accept insulation diameters from 1.05 to 1.15 mm, covering typical Cat 6 and Cat 5e solid or stranded conductors. If your cable insulation exceeds 1.15 mm or falls below 1.05 mm, these plugs will not seat correctly and a different connector is required.