Brute Networks 16GB DDR4-2400 CL15 2Rx8 1.2V Non-ECC UDIMM
16 GB DDR4-2400 CL15 2Rx8 non-ECC UDIMM at 1.2 V for HP Z9H57AT compatible servers
- Total capacity16 GB
- Rated speedDDR4 2400 (PC4 19200)
- ChipsetMajor Brand Chipset
- CAS latencyCL15
- Rated voltage1.2 V
- Buffer typeUnregistered
- 16GB capacity runs more apps at once
- DDR4-2400 speed moves data quickly
- CL15 latency keeps response tight
- 2V operation reduces power draw
- 288-pin UDIMM fits standard desktop slots
HP-compatible 16 GB DDR4 module
This 16 GB DDR4-2400 UDIMM matches HP part number Z9H57AT and runs at CL15 with 1.20 V. It uses a 288-pin unregistered layout and a 2Rx8 organisation built from major-brand chips. The module is sold new and carries a lifetime warranty from the vendor.
Builders adding capacity to HP servers
The stick suits administrators expanding memory in compatible HP platforms that accept non-ECC DDR4-2400 UDIMMs. It will not help buyers who need registered or load-reduced modules, nor those who require ECC error correction for data-integrity workloads. Systems limited to lower speeds or different pin counts cannot use this part.
Fits standard DDR4 UDIMM slots
Installation requires an available 288-pin DDR4 slot that supports 1.20 V unbuffered memory at 2400 MT/s. The single rank-per-channel 2Rx8 design leaves other slots free for additional modules of the same specification. No extra power cables, cooling or BIOS updates are mentioned in the supplied data.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $106.99
- Cheaper than about 67% of the 6,523 comparable items (median $188.99).
- Total capacity 16 GB
- Lower than about 60% of the 6,064 comparable items (median 32 GB).
- Price per GB $6.69 per GB
- Cheaper than about 56% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | HP |
| Total capacity | 16 GB |
| Product type | 288-Pin DDR4 SDRAM |
| Performance | |
| Rated speed | DDR4 2400 (PC4 19200) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL15 |
| ECC support | No |
| Buffer type | Unregistered |
| Memory rank | 2Rx8 |
| Power | |
| Rated voltage | 1.2 V |
Questions about this item
My motherboard has 288-pin DDR4 slots — does this 288-pin UDIMM fit directly?
Yes, the module uses the standard 288-pin DDR4 UDIMM form factor, so it installs directly into any desktop or server board with matching DDR4 slots.
If I add this CL15 2400 MHz stick alongside my current DDR4 modules, what speed will the system run at?
The memory controller will clock all installed modules to the lowest common speed and timing, so this 2400 MHz CL15 stick will run at whatever frequency and latency your existing DDR4 memory dictates.
After installation, how can I confirm the module is recognised as 16 GB at 2400 MHz CL15?
Check the system BIOS or a tool such as CPU-Z; it should report a single 16 GB DDR4 module operating at 2400 MT/s with CAS latency 15 at 1.20 V.
More in ECC Server RAM
Similar items
Brute Networks 16GB DDR4 2400 CL15 2Rx8 1.2V Non-ECC UDIMM server RAM
- 16 GB
- DDR4 2400
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
RIMLANCE RRD21300S4C2K16 16GB (2x8GB) DDR4 2666 ECC Registered RDIMM
- 16 GB (2 × 8 GB)
- DDR4 2666
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
Brute Networks HPE P03049-091 8GB DDR4-2933 1Rx8 Registered ECC server RAM
- 8 GB
- DDR4 2933





