Bryant 9650NC straight blade plug 2-pole 3-wire 50A 250V

Bryant 9650NC 50 A straight-blade plug

The Bryant 9650NC is a 50 A, 250 V AC straight-blade connector built to NEMA 6-50R configuration with two poles and three wires. Industrial-grade nylon housing resists impact and heat in demanding workshops, garages and job-site power distribution. The plug accepts cord diameters from .425 in to 1.110 in, making it suitable for heavy-duty extension cords and equipment leads. It is designed for single-phase wiring where a robust, high-current connection is required.

Industrial nylon body and cord-grip range

The black and grey nylon shell provides dielectric strength and durability without antimicrobial or corrosion-resistant coatings. A standard screw-terminal wiring style allows straightforward field installation with basic hand tools. The wide cord-grip range secures cables from .425 in up to 1.110 in outer diameter, reducing strain on the terminals during daily connect and disconnect cycles. No power indicator or special keying is present, so polarity must be observed manually during assembly.

Verify NEMA 6-50R match

Confirm that the receptacle or inlet you are connecting to is a NEMA 6-50R rated for 50 A at 250 V AC single phase. Measure the outer diameter of the cable you intend to use; it must fall within the .425 in to 1.110 in window for the strain relief to clamp correctly. Ensure your wiring method follows the standard two-pole, three-wire layout with a dedicated ground conductor. This connector is not suited for lower-amperage or different NEMA configurations.