Bryant BRY5262I 15 A 125 V Straight Blade Receptacle
A 15 A, 125 V AC grounded duplex receptacle with screw terminals and flush mounting
- Product typeWiring Devices
- 15 A 125 V AC rating powers standard household devices
- Duplex 5-15R configuration accepts two grounded plugs
- UL 498 and CSA certified for code-compliant safety
- Nylon housing with screw terminals resists heat and wear
- Flush-mount single-gang design fits standard wall boxes
Straight Blade Receptacle 15 A 125 V
The Bryant BRY5262I is a flush-mounted duplex receptacle rated for 15 A at 125 V AC. It accepts a standard NEMA 5-15R plug with two poles and three wires. The ivory nylon housing is polarized and grounded, and the unit carries CSA certification plus UL 498 listing. It is intended for residential or light-commercial branch circuits that require a single-gang outlet.
Sustained Load Performance
The screw-terminal wiring provides a secure connection that resists loosening under continuous current flow. Because the device is rated for the full 15 A without derating, it maintains stable contact resistance during extended use on heating, lighting or appliance circuits. The nylon housing withstands the thermal cycling typical of daily load variations without cracking or discoloration.
Deciding Specification
The NEMA 5-15R configuration is the sole factor that determines compatibility with the plug and circuit you are wiring. If your installation calls for a different NEMA rating, a GFCI-protected face, or a decorator-style cover, this receptacle will not meet those requirements.
How it compares
Measured against everything we stock in Electrical Enclosures & Cabinets, at today’s prices. Recalculated every night.
- Price $4.99
- Cheaper than about 92% of the 1,411 comparable items (median $39.99).
Specifications
| Product | |
|---|---|
| Brand name | BRYANT |
| Product type | Wiring Devices |
Questions about this item
Does the 15 A 125V AC duplex receptacle generate noticeable heat when powering devices all day?
Under normal loads within the 15 A rating the nylon housing and screw terminals run warm but not hot; the device meets UL 498 temperature-rise limits for continuous operation.
What wiring must already be in the wall box for this 2-pole 3-wire grounding receptacle to install correctly?
A 125 V single-phase circuit with hot, neutral and ground conductors, plus a standard flush-mount box, is required for the screw-terminal connections.
Will this NEMA 5-15R ivory receptacle fit alongside older outlets in the same multi-gang cover plate?
Yes — the single-gang duplex form factor matches the industry-standard NEMA WD-1 and WD-6 dimensions used by legacy devices.
More in Electrical Enclosures & Cabinets
Similar items
Hubbell RACO 509 Electrical Box 12.5 cu in
- Electrical Boxes &…
Hubbell Incorporated RACO 205RAC RETRO-RING electrical box
- Electrical Boxes &…
Hubbell Incorporated RACO 206RAC RETRO-RING electrical box
- Electrical Boxes &…





