We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black flexible LED strip on reel, 3.2ft length, 60 LEDs, 10mm wide PCB

BTF-LIGHTING WS2812B1M60LB30 3.2ft 60LED 5V 18W IP30 light kit

SKU CH-82EC-QC2YC MPN WS2812B1M60LB30

Individually addressable 5 V LED strip with 60 WS2812B ICs, 18 W power draw, UL-listed pure-gold wiring and pre-fitted 3M tape for indoor DIY projects

  • Item nameBTF-LIGHTING WS2812B1M60 lb30
  • Product lineBTF-LIGHTING
  • Origin countryBTF-LIGHTING Technology Co., Limited
  • Care and useIndoor
  • Warranty term1 year manufacturer.
  • Item descriptionBTF-LIGHTING, WS2812B RGB IC, Individually Addressable, Drea
  • Individually addressable LEDs enable custom chasing effects with 24-bit colour depth
  • Pure gold bond wires reduce light decay and extend operational life
  • UL-listed components and 5 V supply ensure safe low-voltage operation
  • Pre-fitted 3M adhesive and 3-pin connectors allow quick indoor installation
  • Cuttable 3.2 ft strip with 60 pixels supports flexible DIY project layouts

5 V Individually Addressable LED Strip

This 3.2 ft WS2812B RGB strip contains 60 LEDs on a 10 mm black PCB with pre-soldered 3-pin connectors at both ends. Each LED integrates a WS2812B IC, giving 24-bit colour depth and 256-level brightness control per pixel. The strip is UL listed, uses pure gold bond wires for reduced decay, and includes 3M adhesive backing for indoor mounting.

DIY Lighting Builders and Hobbyists

Suits makers who want a short, flexible, individually addressable strip for custom chasing or full-colour effects driven by SPI-compatible controllers such as ESP32, Raspberry Pi, Arduino or supported app-based modules. Not suitable for buyers who need outdoor or wet-location ratings, longer continuous runs without injection, or a strip that includes a power supply and controller in the box.

5 V 18 W Power Requirement

The strip operates at 5 volts and draws 18 watts at full output, so a DC 5 V supply rated for at least 2 A must be sourced separately. No controller or power adapter is included, and the IP30 rating limits use to dry indoor environments only.

How it compares

Measured against everything we stock in LED Lighting Kits, at today’s prices. Recalculated every night.

Price $11.99
Cheaper than about 91% of the 1,591 comparable items (median $33.99).

Specifications

Product
Brand nameBTF-LIGHTING
Model nameWS2812B1M60 lb30
Part numberWS2812B1M60 lb30
Item nameBTF-LIGHTING WS2812B1M60 lb30
Product lineBTF-LIGHTING
Recommended useIndoor Only
Design styleModern
Power
Rated voltage5 V
Power consumption18 W
Size & build
Product weight0.06 kg
Surface finishBlack
Glass or shade materialSilicone Rubber
Size3.2 ft 60led
Installation type1x WS2812 LED Strip Light, Corded Electric, indoor
Environment & compliance
ComplianceHas fcc id, 2ATV8SP60XE
More details
Origin countryBTF-LIGHTING Technology Co., Limited
Care and useIndoor
Bulb typeLED

Questions about this item

How do I install the WS2812B LED strip and what step is often missed?

Clean the mounting surface, peel the 3M tape on the 10mm IP30 strip, press firmly along the full 1000mm length, then connect the pre-installed 3-pin plugs to a DC5V source and a compatible controller before powering on.

What maintenance or replacement will the BTF-LIGHTING WS2812B1M60LB30 need over time?

The pure gold wire LEDs are rated for long life with minimal decay; occasional dusting of the silicone rubber coating maintains output, and the 1-year manufacturer warranty covers early failures.

What limit appears first when running the 60-LED strip continuously at full white?

The 18W total draw at 5V requires a supply that can deliver the corresponding current; an undersized 5V 2A 10W unit will hit its current limit first, causing voltage drop and colour shift along the 1000mm run.

More in LED Lighting Kits

Similar items