BUCIER DisplayPort 1.4 cable 8K 60Hz 4K 144Hz 3m
Transmits 8K at 60 Hz, 4K up to 144 Hz and 2K up to 165 Hz over 3 m with 32.4 Gbps bandwidth
Cable Length 9.8 Feet
- 3.3 Feet$15.99
- 6.6 Feet$18.99
- 9.8 Feet$21.99
- 16.4 Feet$31.99
- 8K resolution at 60 Hz for ultra-sharp visuals
- 4K at 144 Hz and 120 Hz for smooth high-refresh gaming
- 2K at 165 Hz and 144 Hz for competitive frame rates
- 4 Gbps HBR3 bandwidth handles high resolution and refresh together
- Non-locking buckle and triple-shielded 30 AWG copper protect ports and signal
BUCIER DisplayPort 1.4 cable 3m
This BUCIER DisplayPort 1.4 cable carries 8K at 60 Hz and 4K at up to 144 Hz over a 3 metre length. It suits PC gamers, content creators and multi-monitor users who need HBR3 bandwidth of 32.4 Gbps with Display Stream Compression. The DisplayPort-to-DisplayPort connector fits laptops, desktops and monitors equipped with standard DP ports.
Installation and common issues
The non-locking buckle releases with a straight pull, reducing strain on GPU or monitor ports during removal. Triple shielding and 30 AWG tinned copper conductors resist electromagnetic interference in dense cable runs. Ensure the connector seats fully; a partial insert can limit the link to lower refresh rates or cause signal drop-outs at 8K 60 Hz.
Check before ordering
Verify that both source and display have full-size DisplayPort 1.4 sockets and support the target resolution and refresh rate. Confirm your graphics driver and monitor firmware are current to enable HBR3 and DSC modes. The 3 metre reach suits typical desk setups; longer runs may require an active cable or repeater not included here.
How it compares
Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.
- Price $21.99
- Pricier than about 66% of the 3,804 comparable items (median $15.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
3 more in the same range
Questions about this item
How do I verify the cable is delivering 8K at 60Hz after connecting it?
Check your GPU control panel or monitor OSD to confirm the active resolution reads 7680x4320 at 60Hz; the cable supports HBR3 bandwidth of 32.4 Gbps and DSC for that mode.
What comes in the box and do I need any adapters for a standard DisplayPort monitor?
The package contains the DisplayPort 1.4 cable with non-locking buckles on both ends; no separate adapters are required for a direct DP-to-DP connection.
Which resolution and refresh-rate combination should I pick for a 4K 144Hz gaming monitor?
Select 3840x2160 at 144Hz in your display settings; the cable is rated for 4K at 120Hz and 144Hz via HBR3 and DSC support.
More in DisplayPort Monitor Cables
Similar items
Nippon Labs 50DP14V-MM-6 DisplayPort cable 6 ft 8K 60Hz HBR3 32.4 Gbps
- 6 ft (1.83 m)
- DisplayPort Cable
STARTECH DP2HDMM1MB DisplayPort to HDMI cable 3 ft 4K
- 3 ft (0.91 m)
- DisplayPort to HDMI
Nippon Labs DP-HDMI-6 6 ft displayport cable DP 1.2 to HDMI 4K 30Hz
- 6 ft (1.83 m)
- DisplayPort to HDMI
Tripp Lite P134-001-GC DisplayPort to DVI adapter cable 1 ft
- 1 ft (0.3 m)
- Others
Nippon Labs DP-3-BR2 displayport cable 3 ft 1.2 HBR2 28AWG male to male black
- 3 ft (0.91 m)
- DisplayPort Cable
Tripp Lite P580AB006 6ft DisplayPort cable 4K 60 Hz antibacterial
- DisplayPort








