We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper compression lug with belled barrel and single hole, 5.000 inch length

Burndy

Burndy 4/0 AWG Copper Compression Lug 1 Hole 5.000 in

SKU CH-CQVN-YZYGX

Copper compression lug for 4/0 AWG or 250 kcmil stranded wire with a single 1/2 in stud hole, tin-plated belled barrel, UL 486A-486B and CSA certified, rated 35 kV and 194 °F

  • Overall length5
  • Main materialCopper
  • Product typeCommercial
  • Copper construction ensures high conductivity for reliable power transfer
  • Belled straight barrel simplifies cable insertion during installation
  • Tin-plated contact finish resists corrosion for long-term durability
  • UL 486A-486B and CSA certified for code-compliant safety
  • Rated 35 kV and 194 °F for demanding industrial applications

4/0 AWG Copper Compression Lug

This Burndy lug connects 4/0 AWG or 250 kcmil solid and stranded copper conductors to a 1/2 inch stud. The belled straight barrel eases wire insertion during crimping. It is suited for commercial electrical installations requiring a single-hole copper termination. UL and CSA listings confirm compliance with North American safety standards.

35 kV / 194 °F Operating Limits

The lug carries up to 35 kV and withstands continuous temperatures of 194 degrees Fahrenheit. Tin-plated copper resists corrosion in typical indoor and sheltered outdoor environments. The yellow colour code and die code 023 identify the correct crimp tool setting for a secure joint. It is not intended for voltages or temperatures beyond these ratings.

250 kcmil Maximum Capacity

The barrel accepts copper wire up to 250 kcmil, covering 4/0 AWG and smaller stranded or solid sizes. A single 1/2 inch mounting hole limits the lug to one bolted connection point. Installations needing multiple stud holes, larger conductors or higher voltage ratings will require a different connector.

How it compares

Measured against everything we stock in Wire, Cable & Wiring Supplies, at today’s prices. Recalculated every night.

Price $20.99
Cheaper than about 56% of the 1,610 comparable items (median $25.99).

Specifications

Product
Brand nameBurndy
Product typeCommercial
Size & build
Main materialCopper

Questions about this item

Should I pick the 4/0 AWG lug or the 250 kcmil lug for my cable?

Both sizes are listed for this same lug, so one part covers either wire gauge without needing a different model.

What does the 35 kV rating mean when the lug is installed in a panel?

It is the maximum voltage the insulation and connection can withstand under the UL 486A-486B and CSA certifications.

How does the 1/2 in stud size limit the lug in practice?

The single hole accepts only a 1/2 in bolt, so the lug cannot be used with smaller or larger mounting hardware.

More in Wire, Cable & Wiring Supplies

Similar items