We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bussmann JM60060-2CR two-pole fuse block, thermoplastic body, box-lug terminals, 3.7 in length

Bussmann

Bussmann JM60060-2CR Fuse Block 600V 2P 3.7 in. line protection

SKU CH-TBG9-61YJS

Holds 35–60 A Class J fuses at 600 V AC / 300 V DC in a two-pole, 3.7 in. thermoplastic block with box-lug terminals for 14–2 AWG wire

  • Product typeCircuit Breakers
  • Rated for 600 V AC and 300 V DC industrial circuits
  • Accepts 35 to 60 A Class J fuses for reliable overcurrent protection
  • Box lug terminals suit 14 to 2 AWG conductors
  • Two-pole open design fits bolt-down or DIN-rail mounting
  • UL listed, CSA certified, CE, RoHS and REACH compliant

Two-Pole Class J Fuse Block

The Bussmann JM60060-2CR is a two-pole fuse block rated for 600 VAC and 300 VDC. It accepts UL Class J fuses in the 35 to 60 A range and is built for industrial line protection. The open design suits panel builders and maintenance crews who need accessible, bolt-down or DIN-rail mounting.

35–60 A Capacity With Box Lug Terminals

The block handles continuous loads up to 60 A through box lug connectors that accept 14 to 2 AWG conductors. At 600 VAC the assembly provides reliable isolation for motor circuits and control panels. Headroom ends at the 60 A fuse limit and the 300 VDC ceiling, so higher-current or higher-voltage DC feeds require a different block.

Thermoplastic Body With A4 Stainless Hardware

A thermoplastic housing carries the live parts while A4 stainless steel hardware resists corrosion in damp or chemical environments. Bolt-down slots and DIN-rail compatibility give installers two mounting choices without extra brackets. The 3.70 in. length, 3.00 in. width and 2.60 in. height fit standard enclosures, and the block carries UL Listed, CSA Certified, CE, RoHS and REACH marks.

How it compares

Measured against everything we stock in Breakers & Circuit Protection, at today’s prices. Recalculated every night.

Price $64.99
Pricier than about 57% of the 1,135 comparable items (median $54.99).

Specifications

Product
Product typeCircuit Breakers

Questions about this item

Will this 600 VAC fuse block fit on the same DIN rail as my existing 35 A J-class fuses?

Yes, the JM60060-2CR mounts on DIN rail or bolt-down and accepts 35 to 60 A Class J fuses such as the LPJ, JKS and DFJ series.

How can I verify the block is making proper contact after wiring it with 2 AWG conductors?

Check that the box-lug terminals are torqued to spec, confirm the fuse seats fully in the open design, and measure continuity across both poles at 600 VAC or 300 VDC rating.

Does the package include the Class J fuses or only the thermoplastic two-pole block?

Only the fuse block is supplied; 35–60 A Class J fuses (LPJ, JKS, DFJ) and mounting hardware must be purchased separately.

More in Breakers & Circuit Protection

Similar items