We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 7 ft IEC C14 to C15 power cord with notched connector and SJT jacket

Cable Leader

Cable Leader 7ft C14 to C15 14 AWG 15A 250V White computer power adapter cord

SKU CH-QR3V-SKHY1

A 7 ft white PDU jumper with a C14 plug and high-temperature C15 connector, 14 AWG copper rated 15 A / 250 V, UL Listed and CSA certified

  • Connector count2
  • Conductor gauge14 AWG
  • Product colorWhite
  • Overall length5–10 ft
  • Powers high-temperature gear via notched C15 connector to C16 inlet
  • Heavy-duty 14 AWG copper carries 15A at 250V for server loads
  • SJT jacket rated 105°C and 300V withstands hot rack environments
  • White jacket enables colour-coded circuit identification in dense racks
  • UL Listed and CSA certified (file E210037) with RoHS compliance

IEC C14 to C15 rack jumper

This seven-foot cord connects a C14 plug on a rack PDU or C13 outlet to a notched C15 connector on equipment with a high-temperature C16 inlet. It uses 14 AWG SJT-jacketed copper rated for 15 amps at 250 volts and a 105 °C / 300 V cable rating. The white jacket helps colour-code circuits in a server rack. UL Listed and CSA certified with RoHS compliance.

Suited for hot-running network gear

Network switches, servers and other devices that require the higher-temperature C16 inlet are the intended users. Buyers who need a standard C13 connector for cooler-running equipment should look at a C14-to-C13 cord instead. The cord is not designed for 20 A circuits that would require a heavier 12 AWG cable.

Fits between PDU and equipment

Plug the C14 end into any rack PDU or C13/C14 source and the C15 end into the device's C16 inlet. The 14 AWG gauge frees up headroom for 15 A loads compared with lighter 16 AWG or 18 AWG cords. No additional adapters are required when the rack already provides C13/C14 outlets.

How it compares

Measured against everything we stock in Jumper & Adapter Power Cords, at today’s prices. Recalculated every night.

Price $23.99
Pricier than about 77% of the 402 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameGENERIC
Product colorWhite
Ports & slots
Connector count2
Size & build
Overall length5–10 ft
Conductor gauge14 AWG

Questions about this item

What rack PDU or outlet type does the C14 plug on this 14 AWG cord connect to?

The C14 plug fits any standard C13 outlet or C14 inlet on a rack PDU, UPS or server power supply, delivering up to 15 A at 250 V.

Can I use this white 7 ft jumper with older network switches that have a C14 inlet instead of C16?

No — the notched C15 connector only mates with a high-temperature C16 inlet; a standard C14 inlet will not accept it.

How can I confirm the cord is rated for the 15 A load after installation?

The SJT jacket is marked 14 AWG, 15 A / 250 V, 105 °C / 300 V and carries UL Listed file E210037 and CSA certification.

More in Jumper & Adapter Power Cords

Similar items