Tripp Lite N820-10M 32.81 ft 10Gb Aqua Duplex Multimode 50/125 Fibre Optic Cable
- Fiber Optic
- Aqua
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 2 m OM1 multimode duplex jumper with SC to ST connectors, Corning fiber and OFNR jacket for 1 GbE and 10 GbE short-reach links
This two-metre multimode duplex jumper uses genuine Corning 62.5/125 µm fiber and SC/UPC to ST/UPC connectors with ceramic ferrules. The orange OFNR riser-rated jacket suits in-building and data-centre runs. It carries 1000BASE-SX and 10GBASE-SR signals over short-reach multimode links.
Network engineers extending 1 GbE or 10 GbE multimode connections between switches, servers, SFP/SFP+/QSFP transceivers or patch panels will find the cable matches their connector mix and distance budget. Installations that require single-mode reach, higher-grade OM3/OM4 bandwidth, LC or MPO connectors, or plenum-rated jackets need a different cable.
Confirm both ends of your link accept SC and ST connectors with UPC polish. Ensure the active equipment supports OM1 62.5/125 µm multimode at the intended speed and distance. Check that an OFNR jacket meets local fire-code requirements for the planned pathway.
Measured against everything we stock in Fiber Optic Patch Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | GENERIC |
| Product color | Orange |
| Ports & slots | |
| Connector count | 2 |
| Size & build | |
| Overall length | 5–10 ft |
You need devices with SC and ST multimode ports, such as switches, routers, media converters or patch panels that accept SFP, SFP+ or QSFP transceivers for 1000BASE-SX or 10GBASE-SR links.
Yes, the core and cladding match legacy OM1 multimode equipment, so it connects directly to older switches, servers or patch panels that use the same 62.5/125µm specification.
Check link lights on both transceivers, confirm the negotiated speed shows 1G or 10G, and run a continuity or optical loss test to ensure low-loss mating of the ceramic ferrules.
More in Fiber Optic Patch Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?