STARTECH PAC1011410 10 ft power extension cord 14 AWG
- Cable Connectors
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Extends AC power 25 ft with an 18 AWG SJT cord, NEMA 5-15P to IEC 60320 C13, rated 10 A at 125 V, UL listed and CSA certified
This 25ft power extension cord connects a NEMA 5-15P plug to an IEC 60320 C13 receptacle. It suits PCs, monitors, servers, printers and other devices that use the standard three-pin shroud connector. The black SJT jacket covers 18 AWG grounded copper conductors rated for 10A at 125V. It is a direct replacement or reach-extension for existing AC power cords.
The cord carries UL and CSA certification (file E210037) and meets RoHS requirements. Its 300V, 105C rated SJT jacket handles normal operating temperatures without softening. Molded connectors with integral strain relief protect the three-wire grounded assembly from bending stress at the plug and receptacle ends. No active cooling or noise is involved.
Cable Leader backs the cord with a US-based lifetime warranty that replaces the unit if it ever fails. The package contains only the single 25ft black cable; no additional adapters, cable ties or software are bundled. The warranty covers the cord itself rather than connected equipment. Buyers needing a shorter length or a different colour will need a separate model.
Measured against everything we stock in AC Extension Cords, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Cable Leader |
| Model name | PW101-1225 |
Insert the 5-15P plug fully into a 125V outlet until the ground pin seats, then push the C13 end into the device inlet until the latch clicks — the step most people miss is verifying the latch engages on the C13 side.
Replace it if the jacket shows cuts, the moulded strain relief cracks, the ground pin bends, or the C13 latch no longer holds — the 105C rating means heat damage appears as stiff or discoloured insulation.
The 10A 125V rating is the hard limit; drawing more than 10 amps continuously on the 18 AWG copper will exceed the 300V SJT rating and trip the UL-certified safety margin.
More in AC Extension Cords
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?