STARTECH PEXUSB3S25 2 Port PCI Express USB 3.0 Expansion Card
- 2x USB Ports
- USB 3.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Adds two RS-232 serial ports via PCI with 128-byte FIFO and 920 Kbps throughput
This CableMAX IO-102 card adds one DB9 and one 10-pin RJ45 RS-232 port through a 32-bit PCI 3.0 interface. It uses an Oxford 16C950 UART with a 128-byte FIFO per channel and supports baud rates up to 920 Kbps. A 10-pin RJ45 to DB9 bridge cable is included in the box.
Industrial scanners, POS displays and older serial devices that draw 5 V from the port can run directly from this card via jumper-configurable power output. The low-profile and full-height brackets let it fit either chassis type. Systems running operating systems newer than Windows 8.1 will not have built-in driver support.
The on-board 16C950 UART provides hardware flow control and deep FIFO buffers for reliable high-speed serial communication. Jumpers on the PCB switch the 5 V supply on or off for each port independently. This single feature determines whether your peripheral can operate without an external power adapter.
Measured against everything we stock in PCIe Expansion Cards, at today’s prices. Recalculated every night.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Model name | IO-102 |
| Product type | PCI to Serial Port Card |
| Ports & slots | |
| External connectors | 2 x Serial Ports |
| Compatibility | |
| Supported operating systems | Win 7 Win 8/8.1 Win Vista Win XP |
The 32-bit PCI 3.0 bus provides enough bandwidth for both serial ports to run at their maximum 920 Kbps simultaneously without bottleneck.
A standard-height bracket is included; swap the low-profile bracket using the two mounting screws, then connect the supplied 10-pin RJ45-to-DB9M bridge cable to the on-board RJ45 header.
Move the power-select jumper for the DB9 port to the 5 V position (silk-screened on the PCB) before installing the card; the port defaults to standard RS-232 levels otherwise.
More in PCIe Expansion Cards
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?