We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aqua duplex fibre patch cable with LC connectors, 20 m length

Cables To Go

Cables To Go 01139 OM4 fibre optic cable LC-LC 50/125 duplex multimode PVC aqua 20 m

SKU CH-MA98-PSWZW MPN 01139

Duplex OM4 multimode cable with LC connectors links 10 and 40 GbE transceivers over 20 metres

  • Connector count1
  • Connector details1 x LC Male Network
  • Product typeFiber Optic
  • Product colorAqua
  • Overall length0.5 ft (0.15 m)
  • OM4 multimode supports 40 GbE and 10 GbE links
  • 50/125 µm core works with existing 50/125 equipment
  • Duplex LC-LC connectors fit SFP+ and QSFP+ transceivers
  • 20 m PVC jacket gives flexible indoor routing
  • Aqua colour identifies OM4 cable at a glance

OM4 Duplex Multimode Cable for 40GBase and 10GBaseSR

This OM4 duplex multimode fibre optic cable connects 40GBase BiDi, 10GBaseSR, SFP+ and QSFP+ transceivers in datacentre or wiring-closet environments. It uses 50/125 micron fibre with LC male connectors on each end. The aqua PVC jacket identifies the OM4 rating at a glance. The 20 metre length suits rack-to-rack or cross-connect runs.

Sustained 40 and 10 Gigabit Throughput

The cable supports continuous 40 or 10 gigabit Ethernet traffic without the signal degradation that can appear on lower-grade multimode links. Backward compatibility with existing 50/125 equipment means it integrates into current infrastructure while providing headroom for LED and VCSEL laser sources. Duplex construction keeps transmit and receive paths separate for stable full-duplex operation.

Low-Loss PVC Jacket for Indoor Routing

The aqua PVC sheath is rated for indoor general-purpose use and resists abrasion during installation. OM4-spec attenuation keeps insertion loss low over the full 20 metre run, so transceivers operate within their receive-power budgets. No external power or active components are required, leaving thermal load and acoustic profile unchanged from a passive patch cord.

How it compares

Measured against everything we stock in Fiber Optic Patch Cables, at today’s prices. Recalculated every night.

Price $63.99
Pricier than about 71% of the 812 comparable items (median $29.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameC2G - KVM & NETWORKING
Product typeFiber Optic
Product colorAqua
Ports & slots
Connector count1
Connector details1 x LC Male Network
Size & build
Overall length0.5 ft (0.15 m)
Shipping weight0.16 kg
Package size292 × 178 × 10 mm

Questions about this item

Does the 20 m aqua cable generate any heat or noise when carrying 10 or 40 Gbps traffic all day?

No — it is a passive glass fibre cable with no active electronics, so it produces no heat and makes no sound regardless of data rate or duty cycle.

What transceiver interface must the buyer already have for the LC duplex connectors on this OM4 cable to plug in?

The cable ends in LC male connectors, so each link requires an SFP+ or QSFP+ transceiver with an LC duplex receptacle.

Will this OM4 50/125 µm cable work with the older 50/125 µm multimode patch panels and transceivers already in the rack?

Yes — it is fully backward-compatible with existing 50/125 µm equipment while adding the bandwidth headroom needed for 10 and 40 GbE links.

More in Fiber Optic Patch Cables

Similar items