Panasonic BK-3MCCA8BA Eneloop AA 2000mAh 2100 Cycle 8 Pack
- 8-pack
- AA Ni-MH
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Replacement battery for Artex ELT 110-4 and ELT-200 emergency locators, 17000mAh capacity with ISO9001, RoHS and CE certification
This lithium-ion battery replaces Artex part numbers 452-0130, 452-3063, 453-0190 and BP-1015. It fits the ELT 110-4 and ELT-200 emergency locator transmitters. The pack delivers 17000mAh at 9.0 volts and meets ISO9001, RoHS and CE certification standards.
The unit measures 245.80 x 78.05 x 39.26 mm and weighs 922.2 g, matching the original mechanical envelope. No adapter cables or firmware updates are required; the decoded chip communicates with the transmitter exactly as the factory cell did. Installation videos are widely available online.
At 153.00 Wh the pack supports long-duration emergency transmission cycles. Capacity is sufficient for typical beacon deployment periods but will not cover unlimited back-to-back activations without recharge. The battery is not suited for non-aviation devices or for transmitters using different part numbers.
Measured against everything we stock in Household Batteries & Chargers, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | Cameron sino |
| Model name | Artex ELT 110-4 ELT-200 |
| Part number | Artex 452-3063 453-0190 452-0130 BP-1015 |
| Power | |
| Battery capacity | 17,000 mAh |
| In the box | |
| Battery pack size | 245.8 × 78.05 × 39.26 |
The 17000mAh / 153.00Wh lithium-ion pack is sized to meet the ELT 110-4 and ELT-200 regulatory discharge requirements; exact on-air time depends on the beacon's transmission cycle and temperature.
The sealed lithium-ion cell produces no audible noise and minimal heat under normal ELT standby and transmission loads; the housing is rated for storage up to 60 °C / 140 °F.
You need an Artex ELT 110-4 or ELT-200 unit with the original connector matching part numbers 452-0130, 452-3063, 453-0190 or BP-1015, plus the standard mounting hardware used for the original pack.
More in Household Batteries & Chargers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?