Cameron Sino Battery for Eppendorf Multipette E3/E3x Repeater 1200mAh 4.44Wh
Replacement battery for Eppendorf Multipette E3/E3x and Repeater models, 1200 mAh 4.44 Wh with built-in protection circuit
- Replaces original Eppendorf battery in Multipette and Repeater models
- 1200mAh capacity with 4.44Wh energy for extended operation
- 7V lithium cell fits 53.00 x 34.00 x 6.40mm compartment
- ISO9001, RoHS and CE certified for medical device compliance
- Built-in protection against overcharge, over-discharge and short circuit
Replacement battery for Eppendorf pipettes
This Cameron Sino cell replaces the original battery in Eppendorf Multipette E3, Multipette E3x, Repeater E3, Repeater E3x, Stream, Xstream and Xstream Repeater models. It delivers 1200mAh at 3.7 volts and carries ISO9001, RoHS and CE certification. A fully decoded chip ensures the handset recognises the pack exactly as it would the factory unit.
Suits labs needing a direct drop-in cell
Technicians who want a new, safety-tested pack with over-charge, over-discharge, over-voltage and short-circuit protection will find this a straightforward swap. Users whose device uses a different part number or voltage should look elsewhere, as the pack is built only for the models and part numbers listed.
Fits the existing battery compartment
The cell measures 53.00 by 34.00 by 6.40 millimetres and weighs 24.6 grams, so it occupies the same space as the original. No extra wiring, adapters or firmware steps are required; once the connector is seated the pipette is ready for the recommended two to three full charge cycles to reach full capacity.
How it compares
Measured against everything we stock in Jump Starters, Chargers & Power Packs, at today’s prices. Recalculated every night.
- Price $14.99
- Typical for this category: the median of 1,744 items is $14.99.
Specifications
| Product | |
|---|---|
| Brand name | Cameron Sino |
| Model name | Multipette E3, Multipette E3x, Repeater E3, Repeater E3x, Stream, Xstream, Xstream Repeaters |
Questions about this item
Which Eppendorf pipette models does this 1200mAh 3.7V battery replace?
It fits the Multipette E3, Multipette E3x, Repeater E3, Repeater E3x, Stream, Xstream and Xstream Repeaters.
Will the original charger still charge this replacement battery correctly?
Yes, the fully decoded chip works like the original so the existing charger recognises and charges it normally.
How can I confirm the battery is performing as expected after the first few charge cycles?
After two or three full charge and discharge cycles the battery should reach its rated 4.44Wh capacity and hold charge during normal pipetting use.
More in Jump Starters, Chargers & Power Packs
