Cameron Sino Ti10 Replacement Battery 2500mAh 18.00Wh 7.2V
Replacement lithium-ion battery for Fluke thermal cameras Ti10, Ti20, Ti25, Ti9, TiR and TiR1, 2500 mAh, 18.00 Wh, 7.2 V
- Compatible with Fluke Ti10, Ti20, Ti25 and TiR thermal cameras
- 2500 mAh capacity and 18.00 Wh energy for extended field use
- 2 V lithium-ion pack with fully decoded chip matches original specifications
- 00 × 27.00 × 29.00 mm, 172.0 g fits original battery compartment
- Built-in overcharge, over-discharge, over-voltage and short-circuit protection
Compatible Fluke thermal cameras
This replacement battery fits Fluke Ti10, Ti-10, Ti20, Ti-20, Ti20-RBP, Ti25, Ti-25, Ti9, TiR and TiR1 thermal cameras. It replaces original part numbers 3105035, 3524222 and Ti20-RBP. The lithium-ion cell delivers 2500mAh capacity at 7.2V for 18.00Wh total energy.
Who this suits and who it does not
Technicians maintaining the listed Fluke models can use this as a direct swap. Buyers with other thermal camera brands or Fluke models not named above should look elsewhere. The pack measures 100.00 x 27.00 x 29.00mm and weighs 172.0g, so devices with different bay dimensions will not accept it.
Deciding specification
The 7.2V nominal voltage and 2500mAh capacity determine whether this cell matches the original electrical requirements. Verify your camera's part number against 3105035, 3524222 or Ti20-RBP before ordering.
How it compares
Measured against everything we stock in Jump Starters, Chargers & Power Packs, at today’s prices. Recalculated every night.
- Price $22.99
- Pricier than about 71% of the 1,744 comparable items (median $14.99).
Specifications
| Product | |
|---|---|
| Brand name | Cameron Sino |
| Model name | Ti10, Ti-10, Ti20, Ti-20, Ti20-RBP, Ti25, Ti-25, Ti9, TiR, TiR1 |
Questions about this item
What are the exact dimensions of this 7.2 V 2500 mAh battery so I can confirm it fits my Fluke thermal camera?
The battery measures 100.00 mm by 27.00 mm by 29.00 mm and weighs 172.0 g, matching the original Fluke form factor for Ti10, Ti20, Ti25, Ti9 and TiR series cameras.
Which connector orientation or locking step is most often missed when installing this replacement pack in a Fluke Ti20-RBP?
Align the keyed connector with the camera socket and press firmly until the latch clicks; the decoded chip then communicates instantly with the Fluke firmware.
How should I store the 18.00 Wh lithium-ion pack when the thermal camera will not be used for months?
Keep it at roughly half charge in a dry place below 60 °C; avoid fire, water and disassembly, and cycle it every few months to maintain health.
More in Jump Starters, Chargers & Power Packs
Similar items
Cameron Sino Replacement Battery for GE DPI 620/G Druck DPI620 Genii IO620 4400mAh 16.28Wh
$22.99
0.00028053BTC
In stock
