We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver frost-proof yard hydrant with cast iron head and lockable handle, 93 inches overall length

Campbell

Campbell YH-5LF Frost Proof Yard Hydrant 5 ft Bury Depth

SKU CH-H0ZZ-N04A6

Frost-proof yard hydrant with 5 ft bury depth and self-draining bleeder valve

  • Product typePipes, Valves & Fittings
  • Lead-free construction meets NSF 61 drinking-water standards
  • Self-draining bleeder valve prevents freeze damage in winter
  • 93 in overall length with 5 ft bury depth for deep frost lines
  • Lockable cast-iron handle secures water access against tampering
  • Brass rod and nitrile plunger deliver reliable shut-off at 60 psi

Campbell YH-5LF Frost Proof Yard Hydrant

The Campbell YH-5LF is a lead-free frost proof yard hydrant designed for outdoor water supply in freezing conditions. It features a 5 ft bury depth and an overall length of 93 in. The unit is built with a 1 in galvanized casing and cast iron head for durability. It meets NSF 61 standards for potable water safety.

Replaces standard spigots prone to freezing

This hydrant upgrades installations where a basic hose bibb fails in cold weather. The self-draining bleeder valve empties the riser after each use to prevent ice damage. The jump is worth it when the supply line sits below the frost line at a 5 ft depth. It handles a maximum pressure of 60 psi for typical residential service.

Installation uses 3/4 in FNPT inlet connection

The inlet connects to a 3/4 in female NPT fitting on the supply line. The outlet accepts a standard 3/4 in hose thread for immediate use. A lockable cast iron handle secures the operating rod against unauthorized operation. The 7/16 in brass rod and nitrile plunger resist corrosion, though debris in the line can foul the plunger seat.

How it compares

Measured against everything we stock in Faucet Valves & Replacement Parts, at today’s prices. Recalculated every night.

Price $131.99
Pricier than about 70% of the 1,132 comparable items (median $54.99).

Specifications

Product
Brand nameCAMPBELL
Product typePipes, Valves & Fittings

Questions about this item

What inlet connection does the 3/4 in FNPT yard hydrant need to attach to the water line?

The hydrant has a 3/4 inch FNPT inlet that threads onto a matching male pipe thread; use pipe sealant rated for potable water and tighten to the fitting manufacturer's torque value.

What is the correct sequence for installing the self-draining bleeder valve so the hydrant empties after each use?

Set the hydrant plumb in the trench, backfill around the 1 in galvanized casing, then open the lockable handle fully to let the bleeder valve purge water from the 7/16 in brass rod chamber before closing.

Which internal parts should be inspected or replaced after several seasons of 60 psi service?

The nitrile plunger and brass rod are the wear items; remove the cast-iron head, pull the rod assembly, and replace the plunger if it shows cracking or loss of seal at the 60 psi rating.

More in Faucet Valves & Replacement Parts

Similar items