We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Camvate Crab Clamp with 360 degree ball head, 10 to 54mm opening, 1/4"-20 to 5/8"-27 threads

Camvate

Camvate Crab Clamp 10-54mm 360° Ball Head 1/4"-20 to 5/8"-27 #C1465

SKU CH-36WX-FQWY3

Clamps 10–54 mm surfaces and provides 360° swivel with 90° tilt for microphone positioning

  • 360° ball head for flexible microphone positioning
  • 90° vertical tilt adds precise angle control
  • Crab clamp grips 10 mm to 54 mm surfaces
  • 1/4″-20 female to 5/8″-27 male adapter fits standard gear
  • Quick install and remove speeds up setup

Versatile Mounting Clamp

The Camvate Crab Clamp attaches microphones to shelves, glass, cross bars, steel or desktops. Its jaws open from 10mm to 54mm to fit a wide range of surface thicknesses. A 360-degree ball head provides full swivel plus 90-degree vertical articulation for precise positioning.

Integrated Thread Adapter

The unit combines a 1/4"-20 female socket with a 5/8"-27 male stud in one piece. This built-in adapter lets you connect standard microphone mounts directly without separate hardware. Installation, adjustment and removal are tool-free and quick.

Check Thread Compatibility

Verify that your microphone or shock mount uses a 1/4"-20 male thread to fit the clamp's female socket. Confirm the mounting surface thickness falls within the 10mm to 54mm jaw range. Ensure the 5/8"-27 male stud matches any stand or boom arm you plan to use.

How it compares

Measured against everything we stock in Streaming & USB Microphones, at today’s prices. Recalculated every night.

Price $28.99
Cheaper than about 76% of the 1,309 comparable items (median $47.99).

Specifications

No published specifications for this item yet.

Questions about this item

How often should the 1/4"-20 to 5/8"-27 screw threads be checked or replaced?

Inspect the threads periodically for wear or cross-threading; replace the clamp if the threads no longer grip securely.

What limits the clamp's grip when it is left on a 54mm shelf for long periods?

The maximum 54mm opening sets the hard limit; sustained load on thicker surfaces may gradually reduce spring tension.

Does the 360° ball head generate heat or noise during all-day streaming sessions?

The ball head is a passive metal joint with no moving electronics, so it produces no heat and no audible noise.

More in Streaming & USB Microphones

Similar items