We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact stubby air impact wrench, composite body, 3/8 inch drive, forward reverse toggle, power dial

Capri Tools

Capri Tools CP35100 Stubby Air Impact Wrench 320 ft-lb

SKU CH-8MCH-1DZJC

A compact 3/8 in pneumatic impact wrench delivering 320 ft-lb reverse torque and 300 ft-lb forward torque at 90 PSI with low vibration and 87.9 dBA noise

  • Delivers 320 ft-lb reverse torque for stubborn fasteners
  • Compact 4.8 in body reaches tight engine bays
  • Light 2.86 lb weight reduces operator fatigue
  • Low 4.8 m/s² vibration eases extended use
  • Quiet 87.9 dBA operation protects hearing

Compact stubby impact wrench

The Capri Tools CP35100 is a 3/8 inch drive pneumatic impact wrench built for mechanics working in tight engine bays and suspension assemblies. Its 4.8 inch composite body weighs 2.86 lbs and produces only 4.8 m/s2 vibration, reducing fatigue during extended use. One-hand operation comes from a forward/reverse toggle and thumb-dial power selector.

320 ft-lb maximum reverse torque

The single figure that decides fitment is 320 ft-lb of maximum reverse torque, with 300 ft-lb available in the forward direction. Six power settings — three forward and three reverse — let the operator match output to the fastener without over-torquing. This torque ceiling covers most passenger-vehicle lug nuts and suspension bolts.

4.2 CFM at 90 PSI air demand

The tool consumes 4.2 CFM at 90 PSI and runs at 87.9 dBA, so a modest shop compressor can keep it fed without excessive noise. It will not sustain continuous high-torque runs on a small portable compressor, and the 1/4 inch NPT inlet limits hose options to standard shop fittings. Buyers needing higher sustained torque or 1/2 inch drive capacity should look elsewhere.

How it compares

Measured against everything we stock in Air & Hydraulic Power Tools, at today’s prices. Recalculated every night.

Price $124.99
Pricier than about 69% of the 243 comparable items (median $61.99).

Specifications

Product
Brand nameCAPRI TOOLS

Questions about this item

What does the 320 ft-lb reverse torque mean when I'm actually using this wrench?

The 320 ft-lb maximum reverse torque is the peak force the wrench can apply to break stubborn fasteners loose; real-world results depend on your compressor delivering 90 PSI and 4.2 CFM consistently.

How does the 1/4 in. NPT air inlet and 4.2 CFM at 90 PSI requirement affect the hose and compressor I need?

The 1/4 in. NPT inlet accepts standard industrial couplers, and the tool needs a compressor that can sustain 4.2 CFM at 90 PSI; smaller compressors will cause pressure drop and reduced torque.

Will the 4.8 in. length and 2.86 lb weight fit in the tight spots I work on?

At 4.8 in. long and 2.86 lbs, the stubby design reaches into cramped engine bays and suspension areas where full-size impacts cannot, while the composite housing keeps weight low for overhead work.

More in Air & Hydraulic Power Tools

Similar items