CHICAGO FAUCET COMPANY E36JKABCP bath faucet part
A laminar flow outlet with a 13/16 in - 24 female thread, 1.5 gpm flow rate, chrome finish, NSF/ANSI/CAN 372 low-lead compliance and vandal-resistant construction
- Product typeTools
- Laminar flow outlet delivers a clear 1.5 gpm stream
- Female 13/16 in - 24 threads fit standard bath faucet spouts
- Chrome finish resists corrosion and matches existing fixtures
- NSF/ANSI/CAN 372 certification confirms low-lead content for safer water
- WaterSense labelled for water-efficient performance without sacrificing flow
Laminar flow outlet with vandal resistance
This Chicago Faucet E36JKABCP part is a laminar flow outlet built for commercial bath installations. The female thread measures 13/16 in - 24 and delivers a clear, non-aerated stream suited to high-traffic washrooms. A vandal-resistant design helps deter tampering in public facilities. The chrome finish matches standard Chicago Faucet trim.
Thermals noise and power draw in normal use
Water flows at 1.5 gpm through the laminar outlet, reducing splashing and limiting waste in routine hand-washing. The component meets NSF/ANSI/CAN 372 low-lead content standards and carries WaterSense certification for efficient use. No electrical power is required, so there is no heat or noise generated during operation. California Proposition 65 warnings apply to chemicals in the product.
Replaces worn or non-compliant outlets
This outlet replaces damaged, scaled or non-laminar tips on existing Chicago Faucet bodies with matching 13/16 in - 24 threads. The upgrade is worth it when a facility needs WaterSense compliance, low-lead certification or a vandal-resistant tip for public areas. It does not suit faucets with different thread pitches or male-threaded spouts. Buyers needing a complete faucet assembly or a different flow rate should look elsewhere.
How it compares
Measured against everything we stock in Faucet Valves & Replacement Parts, at today’s prices. Recalculated every night.
- Price $9.99
- Cheaper than about 93% of the 1,132 comparable items (median $54.99).
Specifications
| Product | |
|---|---|
| Brand name | CHICAGO FAUCET |
| Product type | Tools |
| Size & build | |
| Shipping weight | 0.02 kg |
| Package size | 25 × 25 × 25 mm |
Questions about this item
How do I install the laminar flow outlet and which step is often missed?
Thread the 13/16 in - 24 female outlet onto the spout by hand, then tighten gently with a wrench; the step often missed is checking the laminar insert seats fully before final torque.
What maintenance or replacement will this outlet need over time?
Periodically unscrew the outlet to soak the laminar insert in vinegar if mineral build-up reduces the 1.5 gpm flow; replace the insert if the stream stays uneven after cleaning.
What limit appears first during continuous high-volume use?
The 1.5 gpm laminar flow restrictor caps output before pressure loss becomes noticeable, so sustained draw stays steady at the rated rate.
More in Faucet Valves & Replacement Parts
