Chief LVS1UP ConnexSys Portrait Video Wall Mount 42-80" 150 lb

Portrait video wall mount for 42-80 inch displays

The Chief LVS1UP ConnexSys mounting system is designed for professional portrait-orientation video walls using flat-panel displays from 42 to 80 inches. Each mount supports screens weighing up to 150 lb and accommodates VESA patterns from 200 x 100 mm to 800 x 400 mm. The system includes rails that connect multiple mounts together via strut channel, allowing an entire row to be levelled once during installation. It is built for permanent commercial installations where precise alignment and long-term rigidity are required.

13.4 inch extension with tilt adjustment

The mount extends the display 13.4 inches from the wall surface, providing clearance for cabling and airflow behind the screen. A tilt range of -2.5 to 4 degrees lets installers fine-tune the viewing angle and compensate for minor wall irregularities. Lateral adjustment and adjustable depth are also provided so each panel can be aligned precisely with its neighbours without removing the display. The black finish keeps the hardware visually unobtrusive in finished installations.

Strut-channel rigidity for sustained alignment

Because the rails lock into strut channel, the combined structure resists flexing and vibration that can misalign panels over time. The 10-year limited warranty reflects the manufacturer's confidence in the system's long-term stability under continuous operation. Individual displays can be serviced or swapped without disturbing the rest of the row, preserving the overall alignment. This design addresses the ongoing challenge of keeping large portrait video walls flat and level throughout their service life.