Chronomite SR-20L/208 HTR-I 208V bathware
An instant-flow electric tankless water heater operating at 208V AC single phase, delivering 140 to 160 degrees Fahrenheit at up to 1.5 gpm with a 0.35 gpm activation threshold
- Instant hot water at 0.35 gpm activation
- Delivers up to 1.5 gpm for sink use
- Compact 6.25 x 9.63 x 2.75 in fits tight spaces
- 208 V single-phase, 20 A, 4,160 W heating
- Factory-set 140–160 °F range for hospitality sinks
Instant-Flow Electric Tankless Heater
The Chronomite SR-20L/208 HTR-I is an electric tankless water heater operating at 208V AC single phase. It delivers hot water on demand for hospitality sinks and manual hand-washing faucets in commercial and residential indoor environments. The unit measures 6.25 in high, 9.63 in wide and 2.75 in deep with a 3/8 in cold inlet.
Suited for Low-Flow Hand-Washing Stations
This heater activates at a minimum flow of .35 gpm and provides a maximum flow rate of 1.5 gpm. It is not suited for high-volume fixtures such as showers or kitchen sinks that require greater flow. Buyers needing adjustable temperature control should look elsewhere because the thermostat is not adjustable.
Fixed-Temperature Output with No Accessories
The factory-set output range is 140 to 160 degrees F at a 20 A current draw and 4,160 W power consumption. No bundled accessories, fittings or software are included, so installers must supply all plumbing connections and electrical protection separately.
How it compares
Measured against everything we stock in Bath Accessories & Soap Dispensers, at today’s prices. Recalculated every night.
- Price $200.99
- Pricier than about 86% of the 1,499 comparable items (median $39.99).
Specifications
| Product | |
|---|---|
| Brand name | CHRONOMITE LABS |
| Product type | Other |
Questions about this item
What electrical service must be available for the 208V single-phase heater?
A 208 V AC single-phase circuit rated for at least 20 A is required to power the unit.
Can the 3/8 in cold inlet connect directly to standard 1/2 in supply lines?
The cold inlet is 3/8 in; an adapter or reducer is needed to join typical 1/2 in plumbing.
How do I confirm the heater is delivering water in the 140–160 °F range?
Measure the outlet temperature with a thermometer while flowing at least 0.35 gpm; it should read between 140 °F and 160 °F.
More in Bath Accessories & Soap Dispensers
Similar items
Broan-NuTone, LLC 413023 Black Non-Ducted Range Hood
- Space Savers





