Cisco Systems, Inc. C1300-16P-4X network switch, 16 PoE+ ports, 4 SFP+ uplinks, 120 W PoE budget
- Rack-mountable
- Layer Supported:, 3…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Managed Layer 3 switch with 24 PoE+ ports and four 10 GbE SFP+ uplinks, 195 W budget
Ports 24x 10/100/1000 RJ45 · 4x10G SFP+
PoE · Non-PoE PoE
Power Budget 195W
The Cisco Catalyst C1300-24P-4X is a rack-mountable, Layer 3 managed switch with 24 Gigabit RJ-45 ports that deliver PoE+ power and four 10 Gigabit SFP+ uplinks. It suits IT teams building a wired access layer for IP phones, cameras, and access points in a single rack unit.
The 195 W PoE budget powers up to 24 PoE+ devices simultaneously while the four SFP+ slots accept 10 Gigabit fiber or copper modules for high-speed aggregation. Layer 3 routing, 128 Gbps switching capacity, and 95.23 Mpps forwarding rate keep traffic moving across VLANs and subnets.
The unit ships with one internal power supply that operates on 120 V or 230 V AC at 50/60 Hz and draws up to 236.9 W. Sites requiring redundant power or DC input must source a different model.
Measured against everything we stock in Ethernet & PoE Switches, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | Cisco Systems, Inc |
| Product line | Catalyst |
| Part number | C1300-24P-4X |
| Connectivity | |
| Network cabling | Media Type Supported: Optical Fiber Twisted Pair Ethernet Technology: 10 Gigabit Ethernet Network Technology: 10/100/1000Base-T 10GBase-X |
| Management type | Managed |
| Layer support | 3 |
| Ports & slots | |
| Uplink ports | Total Number of Expansion Slots: 4.0 Expansion Slot Type: SFP+ Shared SFP Slot: Yes Number of SFP+ Slots: 4 |
| Main ports | 24 x RJ45 + 4 x SFP+ |
| Power | |
| Power over Ethernet | Yes |
| Size & build | |
| Product dimensions | Height: 1.7 in Width: 17.5 in Depth: 11.8 in |
| Product weight | (Approximate): 8.11 lb |
| Shipping weight | 5.85 kg |
| Package size | 574 × 429 × 107 mm |
| More details | |
| Product format | Rack-mountable |
Other versions of this model
The switch uses a single built-in AC power supply rated for 236.90 W consumption; no field-replaceable power supply module is listed, so the unit is typically replaced as a whole if the supply fails.
The 195 W PoE budget is the hard ceiling; connecting devices that collectively draw more than 195 W will cause the switch to deny power to additional ports per IEEE 802.3at negotiation.
Maximum power draw is 236.90 W, which converts directly to heat; expect roughly that many watts of thermal output inside the cabinet under sustained peak traffic and full PoE load.
More in Ethernet & PoE Switches
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?