We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cleveland C57153 spiral point tap 5/16-18 UNC three flutes bright high speed steel

Cleveland

Cleveland C57153 Spiral Point Tap 5/16-18 UNC 3 Flutes

SKU CH-9WJQ-MCXT5

A spiral-point tap cuts 5/16-18 UNC threads in through-holes using three flutes and high-speed steel

  • Spiral-point design drives chips ahead for cleaner through-holes
  • High-speed steel construction resists wear during repeated threading operations
  • Bright uncoated finish suits general-purpose cutting in steel and iron
  • Three-flute geometry balances chip clearance with thread strength
  • 5/16-18 UNC size matches standard coarse-thread fastener requirements

Cleveland 5/16-18 UNC Spiral Point Tap

This Cleveland C57153 spiral point tap cuts 5/16-18 UNC threads in through-holes using three flutes. It is made from high-speed steel with a bright uncoated finish for general-purpose threading in steel and non-ferrous metals. The H3 thread limit produces a class 2B fit. Machinists and maintenance technicians use it for production tapping where chip evacuation ahead of the tool is preferred.

Practical limits of UNC thread cutting

The tap has an overall length of 2 23/32 inches and a thread length of 1 1/8 inches, so the workpiece must accommodate that reach. A 75 percent thread depth requires a drill size F hole before tapping. The UNC coarse pitch suits standard fastening but is not intended for fine-pitch or high-vibration applications where a UNF thread would be specified. Right-hand cutting direction only.

Installation notes and common issues

Secure the tap in a properly aligned holder and apply cutting fluid to reduce torque and improve thread finish. The spiral point pushes chips forward, so ensure the through-hole allows chips to exit cleanly. Misalignment or a dull drill often causes oversize threads or tap breakage. Reverse the tap frequently to break chips in deeper holes.

How it compares

Measured against everything we stock in Bits, Hole Saws & Accessory Kits, at today’s prices. Recalculated every night.

Price $9.99
Cheaper than about 88% of the 5,493 comparable items (median $27.99).

Specifications

Product
Brand nameCLEVELAND

Questions about this item

Which thread size should I select for a 5/16-18 UNC hole?

The tap is made for a 5/16 in. -18 UNC thread, so choose this exact size to match the hole.

What does the 75 percent thread drill size F mean when I use the tap?

It tells you to drill the hole with an F-size drill bit so the tap cuts about 75 percent of the full thread depth.

How does the H3 thread limit affect the fit of the finished thread?

H3 sets the pitch-diameter tolerance for a class 2B fit, giving a standard medium allowance for nuts or tapped holes.

More in Bits, Hole Saws & Accessory Kits

Similar items