We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cleveland 10 mm 4-flute HSS square end mill, uncoated finish, Weldon flat shank

Cleveland

Cleveland C75098 10 mm 4-Flute HSS Square End Mill

SKU CH-KCY5-6MDTM

10 mm diameter HSS square end mill with 25.4 mm cut length, 9.52 mm Weldon shank and 68.26 mm overall length

  • Product typeMilling
  • 10 mm milling diameter for precise material removal
  • Four-flute high-speed steel construction for smooth cutting performance
  • Center-cutting design enables plunge and profile milling
  • 4 mm length of cut supports deeper passes
  • 52 mm Weldon-shank diameter fits standard tool holders

Cleveland C75098 10 mm Square End Mill

The Cleveland C75098 is a 10 mm square end mill made from high speed steel with an uncoated finish. It features four flutes and a center cutting design for versatile milling operations. The tool uses a Weldon flat shank measuring 9.52 mm in diameter for secure holding. It suits general purpose machining in a workshop environment.

Thermals noise and power draw

Heat generation depends on the spindle speed, feed rate and workpiece material rather than the tool itself. An uncoated high speed steel cutter runs hotter than coated alternatives when used in difficult alloys. Proper coolant or air blast manages temperature and chip evacuation during extended cuts. Power consumption is determined by the machine tool and cutting parameters selected.

25.4 mm length of cut decides the application

The 25.4 mm flute length sets the maximum depth of cut in a single pass for this 10 mm diameter tool. Shallow pockets or profiles within this limit are straightforward; deeper features require multiple steps or a longer series cutter. Overall length is 68.26 mm so check machine clearance before ordering. The shank diameter of 9.52 mm must match your tool holder or collet specification.

How it compares

Measured against everything we stock in Bits, Hole Saws & Accessory Kits, at today’s prices. Recalculated every night.

Price $22.99
Cheaper than about 58% of the 5,493 comparable items (median $27.99).

Specifications

Product
Brand nameCLEVELAND
Product typeMilling

Questions about this item

How do I install the 10 mm end mill with its Weldon flat, and what step is often missed?

Insert the 9.52 mm shank into a Weldon-compatible holder, align the flat with the set screw, and tighten firmly — the step often missed is verifying the flat seats fully against the screw before cutting.

What maintenance or replacement will the uncoated high-speed steel 4-flute cutter need later?

The uncoated HSS flutes will dull with use; plan to resharpen or replace the 10 mm cutter once edge wear degrades finish quality on your workpiece.

What limit appears first during sustained cutting with this 25.4 mm length of cut?

Heat buildup in the uncoated high-speed steel typically becomes the limiting factor before tool deflection, especially in deeper slots at full 25.4 mm engagement.

More in Bits, Hole Saws & Accessory Kits

Similar items