COCONUTS BY MATISSE
COCONUTS BY MATISSE 2Pack 6 Pin PCIe Power Splitter 6 Inches
A two-pack of six-inch Y-cables that split one PSU 6-pin PCIe connector into two for dual-GPU power
- Product typeAmplifiers
- Splits one PSU 6-pin into two GPU connectors
- Six-inch flexible cable with clips prevents accidental disconnects
- Male-to-dual-female design fits standard PCIe power ports
- Two-pack gives a spare for dual-GPU builds or toolkit
- Saves upgrading the PSU when adding a second graphics card
Dual 6-pin PCIe power splitter
This two-pack cable set converts one 6-pin PCIe output from a power supply into two 6-pin connectors for graphics cards. Each splitter measures six inches and includes clips and latches to prevent accidental disconnection. The cables are intended for builders who need to power dual-GPU configurations or a single card requiring two 6-pin inputs without replacing the PSU.
For single-PSU 6-pin setups.
Suitable for systems where the power supply provides only one 6-pin PCIe lead but the graphics hardware demands two. It also helps SLI or multi-GPU builds that require additional 6-pin connections. Builders whose cards require 8-pin, 12-pin or 12VHPWR power inputs should look at alternative adapters or a higher-capacity power supply.
One-to-two 6-pin PCIe split at six inches
The decisive specification is the one-to-two 6-pin PCIe split with a six-inch cable length. This determines whether the splitter can physically reach the graphics card and electrically match the PSU's available connector. Verify that both the power supply and the graphics card use 6-pin PCIe interfaces before purchasing.
How it compares
Measured against everything we stock in Pro Audio Equipment, at today’s prices. Recalculated every night.
- Price $20.99
- Cheaper than about 80% of the 613 comparable items (median $56.99).
Specifications
| Product | |
|---|---|
| Product type | Amplifiers |
Questions about this item
Will the six-inch length reach from my older PSU's single 6-pin connector to both plugs on a dual-GPU card?
Each splitter is six inches long with a male 6-pin end for the PSU and two female 6-pin ends for the graphics card, so measure your case routing to confirm reach.
How can I verify the splitter is seated correctly after installation?
The connectors have clips and latches that click into place; a firm tug on each cable should show no movement when fully latched.
What comes in the 2-pack and is anything else needed to power two 6-pin GPU sockets?
The pack contains two identical Y-splitters; each turns one PSU 6-pin output into two GPU 6-pin inputs, so no extra adapters are required for that connection.
More in Pro Audio Equipment
Similar items
Audio-Technica Cyber Acoustics ACM-4004 3.5mm On-Ear Headphones Black
- Black
- Adapter
QVS Digital S/PDIF to Stereo Analog RCA Audio Converter Pro Sound
- HomeAudio
Monoprice Inc. 115428 Pro Sound HDMI Cable 18Gbps 28AWG 60Hz 6ft
- Consumer Electronics
SUNRISE MEDICAL Internal Mini SAS HD to SATA SFF8643 33 Feet 1m Pro Sound
- Amplifiers





