COMMSCOPE SCPTW Small Cell Pole Top Mount with Stand-off Bracket 8-11in OD

Pole-top mount for 8–11 in OD poles

This CommScope SCPTW kit mounts small-cell equipment on wooden poles with an outside diameter between 8 in and 11 in. The hot-dip galvanised steel bracket bolts to the pole top and holds the radio at a fixed 37 in stand-off distance. It is sized for utility and municipal crews deploying compact nodes on existing wood infrastructure.

Maximum pole diameter 11 in

The bracket accepts poles from 203.2 mm up to 254 mm OD, so the 11 in upper limit is the single figure that decides fit. If the pole exceeds 11 in the clamps will not close; if it is below 8 in the hardware cannot grip. No other dimension in the spec changes compatibility.

Bolt-on install with supplied hardware

The kit ships as a single each with all mounting bolts included, so a two-person crew can lift the 41.2 in tall assembly and secure it with standard wrenches. The most common issue is uneven pole tops that prevent the bracket from seating flat, which can be corrected with shims before final torque.