Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB DDR3 kit (2 × 8 GB) at 1600 MHz CL11, validated for HP EliteDesk 800 G1 SFF and Tower systems
This 16GB kit contains two 8GB DDR3-1600 DIMMs built for HP EliteDesk 800 G1 SFF and Tower systems. Each module runs at CL11 11-11-11 timing on 1.5V without ECC or buffering. The 240-pin unbuffered design matches the factory slot layout for a direct upgrade.
The non-ECC unbuffered profile suits general business applications on supported EliteDesk 800 G1 models listed in the compatibility table. Systems that require registered or error-correcting memory cannot use these sticks. Buyers needing more than 32GB total capacity or a different pin count should look elsewhere.
The modules operate at 1600MHz with a PC3-12800 data rate and CAS latency 11. This specification determines whether the memory matches the platform's supported speed grade. Verify the system's maximum memory speed before purchase.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Computer Memory Solutions |
| Model name | CM10246412800DIMM |
| Total capacity | 16 GB (2 × 8 GB) |
| Product type | 240-Pin DDR3 SDRAM |
| Performance | |
| Rated speed | DDR3 1600 (PC3 12800) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL11 |
| Memory timings | 11-11-11 |
| ECC support | No |
| Buffer type | Unbuffered |
| Memory rank | 2Rx8 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.5 V |
| Compatibility | |
| Compatible systems | Hp/Compaq Elitedesk 800 G1 Series Sff/Tower Towers |
| In the box | |
| Included items | 2 Memory RAM Sticks |
The 16 GB kit provides two matched 8 GB modules for dual-channel operation in the EliteDesk 800 G1, while a single 8 GB stick would leave one channel empty and halve peak bandwidth.
The modules run at 1600 MT/s with 11-11-11 timing at 1.5 V, giving the maximum standard DDR3 throughput the platform’s memory controller supports without overclocking.
Yes — the 240-pin DDR3 interface caps transfer rate at PC3-12800, so the kit cannot exceed 1600 MT/s regardless of faster modules being installed.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?