Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB dual-channel DDR3-1600 kit with CL11 timing and 1.5 V operation, validated for HP Pavilion 500 series desktops
This 16 GB kit contains two 8 GB unbuffered DIMMs built for HP Pavilion 500-238D, 500-245La, 500-281 and 500-A60 desktops. It uses 240-pin DDR3 SDRAM running at 1600 MHz with CL11 timing and 1.5 V operation. The modules are non-ECC and carry a 2Rx8 rank configuration.
The DDR3 1600 (PC3 12800) standard tops out at this data rate, so the kit cannot exceed 1600 MHz without platform overclocking support. Two DIMMs fill both available slots on the supported Pavilion boards, leaving no free sockets for further expansion. The 1.5 V requirement matches the platform specification exactly.
Sixteen gigabytes matches the maximum memory the compatible Pavilion models can address, giving full headroom for multitasking and larger workloads. Builders needing more than 16 GB must choose a different platform, as the chipset and socket count prevent larger kits. The dual-rank design helps density but does not raise the system ceiling.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Computer Memory Solutions |
| Model name | CM10246412800DIMM |
| Total capacity | 16 GB (2 × 8 GB) |
| Product type | 240-Pin DDR3 SDRAM |
| Performance | |
| Rated speed | DDR3 1600 (PC3 12800) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL11 |
| Memory timings | 11-11-11 |
| ECC support | No |
| Buffer type | Unbuffered |
| Memory rank | 2Rx8 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.5 V |
| Compatibility | |
| Compatible systems | Hp Pavilion 500-238D, 500-245La, 500-281, 500-A60 |
| In the box | |
| Included items | 2 Memory RAM Sticks |
The 16GB kit fills both slots for dual-channel performance and matches the board's 16GB maximum, while a single 8GB leaves capacity unused.
It confirms the memory runs at 1600 MHz with CL11 timing at 1.5V, delivering the standard DDR3-1600 bandwidth your Pavilion expects.
The 240-pin DDR3 slots are native to these models, so the 1600 MHz modules operate at their rated speed without downclocking.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?