We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR3 DIMM sticks in a matched pair

Computer Memory Solutions

Computer Memory Solutions 16GB (2x8GB) DDR3 1600MHz Dell Optiplex XE2 memory upgrade

SKU CH-5AYT-01FPN

16 GB dual-channel DDR3-1600 kit validated for Dell OptiPlex XE2 systems

  • Total capacity16 GB (2 × 8 GB)
  • Rated speedDDR3 1600 (PC3 12800)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL11
  • Memory timings11-11-11
  • Rated voltage1.5 V
  • Guaranteed Dell Optiplex XE2 compatibility with validated modules
  • 16 GB total capacity across two 8 GB sticks
  • DDR3 1600 MHz speed rated at PC3 12800
  • Low CL11 latency timings at 1.5 V operation
  • Lifetime warranty direct from Computer Memory Solutions

16GB DDR3 kit for Dell Optiplex XE2

This 16GB kit contains two 8GB DDR3 1600MHz modules built specifically for the Dell Optiplex XE2. The memory runs at PC3 12800 speed with CL11 timing and 1.5V voltage. It targets owners of that workstation who need the maximum 32GB capacity supported by the four-slot board.

Unbuffered non-ECC DIMMs with major-brand chips

Each stick is a 240-pin unbuffered non-ECC DIMM using major-brand chipsets and no heat spreader. The 2Rx8 rank configuration matches the platform requirements. Two modules fill half the available slots, leaving room for a second identical kit to reach the 32GB limit.

Verify four DDR3 slots

Confirm the system has four DDR3 DIMM sockets and that the BIOS recognises 8GB density modules. The board maximum is 32GB, so this kit cannot be combined with larger sticks. Buyers who need ECC, registered memory or speeds beyond DDR3 1600 should look elsewhere.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $37.99
Cheaper than about 81% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB (2 × 8 GB)
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $2.37 per GB
Cheaper than about 92% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameComputer Memory Solutions
Model nameCM10246412800DIMM
Total capacity16 GB (2 × 8 GB)
Product type240-Pin DDR3 SDRAM
Performance
Rated speedDDR3 1600 (PC3 12800)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL11
Memory timings11-11-11
ECC supportNo
Buffer typeUnbuffered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.5 V
Compatibility
Compatible systemsDell Optiplex XE2
In the box
Included items2 Memory RAM Sticks

Questions about this item

Does the DDR3-1600 PC3-12800 speed match the Dell Optiplex XE2 maximum supported memory frequency?

The kit runs at DDR3 1600 (PC3-12800) which is the standard speed for the Optiplex XE2 platform. The system supports up to 32 GB across four sockets, so this 16 GB kit operates within the validated specification.

Will the 240-pin DIMM height and 1.5 V unbuffered design clear the Optiplex XE2 chassis and CPU cooler?

These are standard-height 240-pin DDR3 DIMMs without heat spreaders, drawing 1.5 V. The low-profile modules fit the Optiplex XE2 motherboard slots and leave clearance for the factory cooler in the small-form-factor case.

Do I need to enable XMP in the Dell BIOS for the CL11 11-11-11 timings to apply?

Dell Optiplex BIOS does not expose XMP. The modules are JEDEC-standard DDR3-1600 CL11, so the system will configure 11-11-11 timings automatically at 1.5 V when you install the pair in matching-colour slots.

More in Model-Specific Memory Upgrades

Similar items