We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Computer Memory Solutions

Computer Memory Solutions 16GB (2x8GB) DDR3L 1600 SODIMM HP Envy M6 - A7

SKU CH-4Y4K-MGN2D

16 GB DDR3L 1600 kit (2 × 8 GB SODIMM, CL11, 1.35 V) validated for HP Envy M6‑1203, M6‑1205 and M6‑1208 notebooks

  • Total capacity16 GB (2 × 8 GB)
  • Rated speedDDR3L 1600 (PC3L 12800)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL11
  • Memory timings11-11-11
  • Rated voltage1.35 V
  • 16 GB kit gives headroom for multitasking
  • DDR3L 1600 speed keeps data flowing
  • 35 V operation reduces power draw
  • CL11 timing delivers responsive access
  • 204-pin SODIMM fits HP Envy M6 models

16GB DDR3L kit for HP Envy M6

This 16GB kit contains two 8GB SODIMM modules built to the DDR3L 1600 standard. It is designed as a direct memory upgrade for the HP Envy M6 models listed in the compatibility data. The modules operate at 1.35V and use the 204-pin form factor required by those notebooks.

Suits owners of the listed Envy M6 models

The kit matches the specifications for HP Envy M6-1203So, M6-1205Dx, M6-1205Tx and M6-1208Tx systems. Builders working on other platforms or desktop boards should look elsewhere because the 204-pin DDR3L form factor and voltage are not compatible. Systems requiring ECC or registered memory will not be supported by this unbuffered non-ECC kit.

Deciding specification: DDR3L 1600 at 1.35V

The memory runs at DDR3L 1600 (PC3L 12800) with a CAS latency of 11 and timing of 11-11-11. The 1.35V operating voltage is the critical figure that distinguishes DDR3L from standard DDR3. Verify that the target notebook accepts this voltage and speed before purchasing.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $39.99
Cheaper than about 80% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB (2 × 8 GB)
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $2.50 per GB
Cheaper than about 92% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameComputer Memory Solutions
Model nameCM10246412800SODRL
Total capacity16 GB (2 × 8 GB)
Product type204-Pin DDR3 SO-DIMM
Performance
Rated speedDDR3L 1600 (PC3L 12800)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL11
Memory timings11-11-11
ECC supportNo
Buffer typeUnbuffered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.35 V
Compatibility
Compatible systemsHp Envy M6-1203So, M6-1205Dx, M6-1205Tx, M6-1208Tx
In the box
Included items2 Memory RAM Sticks

Questions about this item

Will these 204-pin DDR3L SODIMM modules fit the memory slots in an HP Envy M6-1203So?

Yes, the kit is validated for the HP Envy M6-1203So, M6-1205Dx, M6-1205Tx and M6-1208Tx. Each module uses the standard 204-pin DDR3L SODIMM form factor that those laptops require.

What is the correct way to seat both 8 GB sticks so the laptop recognises the full 16 GB?

Power off and unplug the laptop, remove the battery if accessible, then insert each module at an angle into a slot and press down firmly until the side clips click. The common mistake is stopping before the clips engage, leaving the stick partially seated.

When should I expect to replace these DDR3L 1600 CL11 modules?

DDR3L SODIMMs have no moving parts and no scheduled replacement interval. They are typically kept until a system upgrade requires a different memory generation or capacity.

More in Model-Specific Memory Upgrades

Similar items