We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Computer Memory Solutions

Computer Memory Solutions 16GB (2x8GB) DDR4 2400 CL17 for Gigabyte GA-H110M-S2 series memory upgrade

SKU CH-4HPY-A5P7B

16 GB dual-channel DDR4 2400 CL17 kit validated for Gigabyte H110 motherboards

  • Total capacity16 GB (2 × 8 GB)
  • Rated speedDDR4 2400 (PC4 19200)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL17
  • Memory timings17-17-17
  • Rated voltage1.2 V
  • 16GB dual-channel kit boosts multitasking headroom on supported Gigabyte H110 boards
  • DDR4 2400 CL17 timing delivers responsive throughput for everyday workloads
  • 2V unbuffered DIMMs run cool without a heat spreader
  • Validated for GA-H110M-S2 series including S2H, S2HP, S2PH, S2PV, WW and H110N
  • Two 8GB 288-pin modules fill both slots for a 32GB maximum capacity

16GB DDR4 Kit for Gigabyte H110 Boards

This 16GB kit contains two 8GB DDR4 2400 CL17 modules built for Gigabyte GA-H110M-S2 series motherboards. It suits owners of those boards who want to reach the platform's 32GB maximum using both memory slots. The unbuffered non-ECC DIMMs run at 1.2V with 17-17-17 timings. Buyers whose systems use a different chipset or who need ECC registered memory should look elsewhere.

Matched Pair Eliminates Mixing Risks

The two sticks are packaged together as a tested pair so they share identical timing and voltage characteristics. This removes the instability that can appear when dissimilar modules are combined on the H110 platform's two slots. No heat spreaders are included, keeping the profile low for tight CPU cooler clearances. The kit does not contain software, adapters or extra accessories beyond the two DIMMs.

Simple Two Slot Installation

Installation consists of seating both 288-pin DIMMs into the board's two DDR4 slots until the retention clips click. The motherboard firmware typically applies the 2400 speed and CL17 timings automatically. A common issue occurs when a 32-bit operating system is used because it cannot address the full 16GB capacity. Another frequent problem is forgetting to fully latch both clips which causes boot failures or memory errors.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $75.99
Cheaper than about 71% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB (2 × 8 GB)
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $4.75 per GB
Cheaper than about 80% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameComputer Memory Solutions
Model nameCM1024642400DIMM
Total capacity16 GB (2 × 8 GB)
Product type288-Pin DDR4 SDRAM
Performance
Rated speedDDR4 2400 (PC4 19200)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL17
Memory timings17-17-17
ECC supportNo
Buffer typeUnbuffered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.2 V
Compatibility
Compatible systemsGigabyte GA-H110M-S2, GA-H110M-S2H, GA-H110M-S2HP, GA-H110M-S2PH, GA-H110M-S2PV, GA-H110M-WW, GA-H110N Motherboards
In the box
Included items2 Memory RAM Sticks

Questions about this item

Will the DDR4 2400 modules need a firmware update or replacement if I later move to a newer motherboard?

These are standard JEDEC DDR4 2400 DIMMs with no firmware; they simply work or not with the new board's memory controller.

What limit appears first when the kit runs at full load for hours?

The motherboard caps total memory at 32 GB across its two slots, so capacity is the hard ceiling.

How much heat and power do the two 8 GB sticks draw during all-day operation?

Each stick runs at 1.2 V with no heat spreader, so thermal output stays low and fits standard case airflow.

More in Model-Specific Memory Upgrades

Similar items