We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR4 SODIMM sticks, 260-pin, no heat spreader

Computer Memory Solutions

Computer Memory Solutions 16GB (2x8GB) DDR4 2400MHz CL17 SODIMM HP ProDesk 400/600 G3 Mini memory upgrade

SKU CH-JT32-5D5WZ

16 GB dual-channel DDR4 SODIMM kit at 2400 MHz CL17 for HP ProDesk 400 G3 Mini and 600 G3 Mini

  • Total capacity16 GB (2 × 8 GB)
  • Rated speedDDR4 2400 (PC4 19200)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL17
  • Memory timings17-17-17
  • Rated voltage1.2 V
  • 16 GB kit lets you reach the 32 GB platform maximum
  • 2400 MHz DDR4 speed matches the ProDesk 400 G3 Mini specification
  • CL17 timing and 1.2 V voltage keep power draw low
  • Two 8 GB sticks populate both SODIMM slots for dual-channel operation
  • Guaranteed compatibility with HP ProDesk 400 G3 Mini and ProDesk 600 G3 Mini

HP ProDesk G3 Mini upgrade kit

This 16 GB kit contains two 8 GB DDR4 SODIMM modules built for HP ProDesk 400 G3 Mini and ProDesk 600 G3 Mini desktops. It targets owners of those compact business PCs who need more memory for multitasking or heavier workloads. The matched pair installs directly into the two available SO-DIMM slots. No other systems are validated by the supplier.

Unbuffered non-ECC SO-DIMM layout

Each stick uses a 260-pin DDR4 SO-DIMM form factor with 2Rx8 organisation and major-brand chips. The modules are unbuffered and non-ECC, matching the requirements of the supported ProDesk Mini platforms. Without a heat spreader the profile stays low, which helps inside the tight chassis. A lifetime exchange or repair warranty against manufacturing defects is provided by the manufacturer when purchased directly.

Standard DDR4 voltage and timing

The memory runs at 1.2 V with a CL17 17-17-17 timing profile at 2400 MHz (PC4 19200). This voltage is the DDR4 default, so power draw remains modest and thermals stay manageable in the small-form-factor enclosure. Fan noise is unaffected because the modules add no active cooling. The kit fills both sockets for a 32 GB maximum capacity on these models.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $81.99
Cheaper than about 70% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB (2 × 8 GB)
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $5.12 per GB
Cheaper than about 75% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameComputer Memory Solutions
Model nameCM1024642400SO
Total capacity16 GB (2 × 8 GB)
Product type260-Pin DDR4 SO-DIMM
Performance
Rated speedDDR4 2400 (PC4 19200)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL17
Memory timings17-17-17
ECC supportNo
Buffer typeUnbuffered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.2 V
Compatibility
Compatible systemsHP ProDesk 400 G3 Mini, ProDesk 600 G3 Mini
In the box
Included items2 Memory RAM Sticks

Questions about this item

Will the DDR4 2400MHz speed run at its rated frequency in a ProDesk 400 G3 Mini?

The kit is rated at 2400 MHz PC4 19200; the ProDesk 400 G3 Mini memory controller supports up to 2400 MHz, so the modules will operate at their full rated speed.

Does the 260-pin SO-DIMM form factor fit the ProDesk 600 G3 Mini memory slots?

Yes, each module uses the standard 260-pin DDR4 SO-DIMM layout with a 1.2 V unbuffered design that matches the two slots in the ProDesk 600 G3 Mini.

What is the correct way to seat both 8 GB sticks so the system recognises the full 16 GB?

Power off and unplug the Mini, open the chassis, insert each stick at the same angle until the side clips click, then verify both modules appear in BIOS before closing the case.

More in Model-Specific Memory Upgrades

Similar items