We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Computer Memory Solutions

Computer Memory Solutions 16GB (4x4GB) DDR3-10600 ECC Registered DIMM 1333MHz Dell T7600

SKU CH-VFRV-RC5JZ

Four 4 GB DDR3-1333 ECC registered DIMMs totalling 16 GB for Dell Precision T7600 workstations

  • Total capacity16 GB (4 × 4 GB)
  • Rated speedDDR3 1333 (PC3 10600)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL9
  • Memory timings9-9-9
  • Rated voltage1.5 V
  • 16 GB kit upgrades Dell Precision T7600 to 128 GB max
  • ECC registered DDR3-1333 guards data integrity in server workloads
  • Four matched 4 GB modules install in quad-channel banks
  • 240-pin DIMMs run at standard 1.5 V with CL9 timing
  • Lifetime warranty from Computer Memory Solutions backs every stick

Dell T7600 ECC Registered Upgrade

This 16 GB kit contains four 4 GB DDR3-1333 registered ECC DIMMs built for the Dell Precision Workstation T7600. The modules run at 1.5 V with CL9 timing and use a 240-pin form factor. They are intended for server-class workloads that require error correction and registered buffering.

Replacing unbuffered or mixed ECC memory

The T7600 supports unbuffered ECC, registered ECC, or load-reduced DIMMs, but mixing those types is not supported. If the workstation currently uses unbuffered ECC modules, this registered kit replaces them for a consistent configuration. The upgrade is worthwhile when the system needs registered DIMMs to reach higher capacities or improved signal integrity.

Verify bank population and module rank

Before ordering, confirm that each memory bank will contain only like modules because x4 and x8 DRAM versions must not be mixed within the same bank. The platform provides 16 sockets across four banks and accepts up to 128 GB of registered ECC DIMMs. Ensure the existing layout can accommodate four 2Rx4 modules in the correct slots.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $43.99
Cheaper than about 79% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB (4 × 4 GB)
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $2.75 per GB
Cheaper than about 91% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameComputer Memory Solutions
Model nameCM5127210600ECCR2R4H
Total capacity16 GB (4 × 4 GB)
Product type240-Pin DDR3 SDRAM
Performance
Rated speedDDR3 1333 (PC3 10600)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL9
Memory timings9-9-9
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.5 V
Compatibility
Compatible systemsDell Precision Workstation T7600
In the box
Included items4 Memory RAM Sticks

Questions about this item

Will these 240-pin DDR3 modules fit the Dell Precision T7600 memory slots?

Yes, the 240-pin DDR3 form factor matches the T7600's registered DIMM slots exactly.

What is the correct way to populate the four modules across the T7600's sixteen sockets?

Install one 4 GB stick in each of the four banks, keeping identical 2Rx4 modules together per bank as the system requires.

When should the 2Rx4 registered ECC modules be replaced if ECC error counts rise?

Replace the kit when the system logs show increasing correctable errors, indicating the 2Rx4 chips are degrading.

More in Model-Specific Memory Upgrades

Similar items