We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR3 DIMMs with black chips no heat spreaders

Computer Memory Solutions

Computer Memory Solutions 16GB (4x4GB) DDR3 1333 ECC Registered DIMM Quad Kit

SKU CH-YGHX-5370A

Quad-channel 16 GB kit of four registered ECC DDR3-1333 DIMMs validated for ASRock EP2C602 servers

  • Total capacity16 GB (4 × 4 GB)
  • Rated speedDDR3 1333 (PC3 10600)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL9
  • Memory timings9-9-9
  • Rated voltage1.5 V
  • 16 GB ECC Registered kit keeps server data accurate
  • 1333 MHz DDR3 speed matches ASRock EP2C602 spec
  • Quad-channel 4 x 4 GB layout enables full bandwidth
  • 5 V operation fits standard DDR3 server slots
  • 240-pin Registered DIMM form factor installs directly

Target Server Memory

This 16 GB quad kit provides four 4 GB registered ECC DIMMs built for ASRock EP2C602, EP2C602-2L+/D16 and EP2C602-4L servers. The modules run at DDR3 1333 with CL9 timing and 1.5 V. They are intended for administrators who need matched sticks for quad-channel operation on supported dual-socket platforms.

Compatibility Checklist

Verify that your server model appears in the supported list and that the board has 240-pin DDR3 slots. Confirm the CPU installed allows registered DIMMs; some processors restrict memory to unbuffered ECC only. Ensure all four modules can be installed in the same channel set, as mixing registered and unbuffered types in one system is not supported.

Build Integration

The kit delivers a matched set so the memory controller can initialise quad-channel mode without manual pairing. Registered buffering reduces electrical load on the memory bus, freeing the platform to populate up to eight sockets where the board allows. No heat spreaders are fitted, so airflow around the DIMM row should be maintained by the server chassis fans.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $40.99
Cheaper than about 80% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB (4 × 4 GB)
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $2.56 per GB
Cheaper than about 91% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameComputer Memory Solutions
Model nameCM5127210600ECCR2R4H
Total capacity16 GB (4 × 4 GB)
Product type240-Pin DDR3 SDRAM
Performance
Rated speedDDR3 1333 (PC3 10600)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL9
Memory timings9-9-9
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.5 V
Compatibility
Compatible systemsASRock Server EP2C602, EP2C602-2L+/D16, EP2C602-4L
In the box
Included items4 Memory RAM Sticks

Questions about this item

Does the kit include everything needed for a quad-channel upgrade, or must extra modules be purchased?

The box contains four 4 GB DDR3 registered DIMMs — a complete 16 GB quad kit — so no additional sticks are required for a four-slot server.

Should I pick the 1333 MHz CL9 registered kit or a different speed for my ASRock EP2C602?

The EP2C602 platform specifies DDR3-1333 registered modules in quad-channel sets; this 1333 MHz CL9 kit matches that requirement exactly.

What does the 1333 MHz rating deliver once the memory is installed in the server?

It provides 1333 MT/s transfer rate per module with CL9 timing at 1.5 V, enabling quad-channel bandwidth across the four populated sockets.

More in Model-Specific Memory Upgrades

Similar items