Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB DDR4 2400 MHz dual-channel kit, CL17 1.2 V unbuffered DIMMs validated for MSI X99A Gaming 7, Godlike, Tomahawk, Workstation and XPOWER AC boards
This 16 GB kit contains two 8 GB DDR4 2400 modules rated CL17 at 1.2 V. It is built for MSI X99A Gaming 7, Godlike Gaming, Tomahawk, Workstation and XPOWER AC motherboards. The unbuffered non-ECC DIMMs use a 288-pin layout and ship as a matched pair.
The modules run at DDR4 2400 (PC4 19200) with 17-17-17 timings. The supported MSI X99A boards provide eight DIMM slots and a maximum memory capacity of 128 GB. Installing this kit occupies two slots and leaves six slots available for further expansion within that platform limit.
Verify that your motherboard is one of the five listed MSI X99A models before ordering. Confirm you have at least two free 288-pin DDR4 slots for the dual-channel kit. The platform supports up to 128 GB across eight sockets, so total capacity after installation must stay within that ceiling.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Computer Memory Solutions |
| Model name | CM1024642400DIMM |
| Total capacity | 16 GB (2 × 8 GB) |
| Product type | 288-Pin DDR4 SDRAM |
| Performance | |
| Rated speed | DDR4 2400 (PC4 19200) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL17 |
| Memory timings | 17-17-17 |
| ECC support | No |
| Buffer type | Unbuffered |
| Memory rank | 2Rx8 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
| Compatibility | |
| Compatible systems | MSI X99A Gaming 7, X99A GODLIKE Gaming, X99A Tomahawk, X99A Workstation, X99A XPOWER AC Motherboards |
| In the box | |
| Included items | 2 Memory RAM Sticks |
The 2x8GB kit runs in dual-channel on the listed MSI X99A boards, doubling memory bandwidth compared with a single stick.
On a compatible X99A platform the modules operate at 2400MHz with CL17 timings at 1.2V, providing the rated PC4-19200 throughput.
The DDR4 288-pin DIMM interface caps transfer rate at 2400MHz on these boards, so the kit cannot exceed its PC4-19200 specification.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?